Industrial-grade 4G routers
Support 5 100M copper ports (one of them supports PoE power receiving), 2 RS-232/485 serial ports, 2 WIFI antenna interfaces, 2 LTE antenna interfaces, 2 SIM card slots, etc.
4g router supplier, 4g router provider support all 4G networks cellular wireless network types include: LTE/WCDMA(HSPA+)/EDGE/ TD-SCDMA /GSM/CDMA/GPRS
Support WLAN wireless hotspot function
Support dual power supply, input voltage: 12~48VDC
PoE port supports 48VDC power supply input
Industrial wifi router price is appropriate
Support -40～75℃ wide operating temperature range
Specifications
Standard & Protocol
IEEE802.11b/g/n for WLAN
IEEE802.11i for wireless security
IEEE802.11r for fast roaming
IEEE802.3af/at for PoE
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
Security
SSID Broadcast Switch, MAC Filtering, IP Filtering, URL Filtering, Keyword Filtering, WPA2-PASK and WEP SHARED Encryption, NAT, Port Mapping, Virtual Server, GRE, PPTP Client, PPTP Server, L2TP Client, L2TP Server and IPSEC VPN Encryption, DMZ
Reliability
Floating Route RIP, VRRP, Multi WAN Port and Wire/Wireless Interface Backup, Link Online Test, Embedded Watchdog
Troubleshooting
Ping, Traceroute, Port Loopback
WIFI Transmission Rate
802.11n: 6.5~300Mbps
802.11b: 11/5.5/2/1Mbps
802.11g: 54/48/36/24/18/12/9/6Mbps
WIFI RF
Channel: 2.412GHz~2.4835GHz
RF power output: 23dBm
Modulation scheme: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM
WIFI Receiving Sensitivity
802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7
802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7
802.11g: -91dBm@6Mbps, -72dBm@54Mbps
802.11b: -93dBm@1Mbps, -87dBm@11Mbps
WIFI Transmission Power
802.11n_HT40: 23dBm@MCS0, 20dBm@MCS7
802.11n_HT20: 23dBm@MCS0, 20dBm@MCS7
802.11g: 23dBm@6Mbps, 20dBm@54Mbps
802.11b: 23dBm@1Mbps, 23dBm@11Mbps
LTE Operating Frequency Band
TDD-LTE: Band38/39/40/41
FDD-LTE: Band 1/3/5/7/8/20
WCDMA: Band1/5/8
TD-SCDMA: B34/39
EVDO/CDMA1X: BC0
GSM: Band 3/8
LTE Bandwidth
(downward, upward)
TDD-LTE: Rel 9 Cat4 TDD-LTE 112Mbps/30Mbps
FDD-LTE: Rel 9 Cat4 FDD-LTE 150Mbps/50Mbps
DC-HSPA+: 42Mbps/5.76Mbps
HSPA+: 21Mbps/5.76Mbps
UMTS: 384kbps/384kbps
EVDO RevA: 3.1Mbps/1.8Mbps
EVDO Rev0: 2.4Mbps/153.6kbps
TD-HSPA: 4.2Mbps/2.2Mbps
TD- SCDMA: 2.8Mbps/2.2Mbps
CDMA 1x: 153.6kbps/153.6kbps
EDGE: 236.8kbps/236.8kbps
GPRS: 85.6kbps/85.6kbps
LTE Sensitivity
GSM: <-108dBm
WCDMA: <-109dBm
TD-SCDMA: <-108dBm
TDD-LTE:
l Band38/39/40: <-100dBm@5MHz BW
l Band41: <-98dBm@5MHz BW
FDD-LTE:
l Band1: <-100dBm@5MHzBW
l Band3/8: <-97dBm@5MHzBW
l Band5: <-98dBm@5MHzBW
CDMA: <-108dBm
EVDO: <-108dBm
Maximum Transmission Power Of LTE
LTE-FDD/TDD: 23 ±2dBm
WCDMA: 24 +1/-3dBm
TD-SCDMA: 24 +1/-3dBm
EVDO/CDMA 1X: 24 ±1dBm
GSM850/900: 33±2dBm
GSM1800/1900: 30±2dBm
Interface
Copper port: 5 10/100Base-T(X) RJ45 ports, which could be configured to 5 LAN or 4 LAN+1 WAN
Serial port: 2 RS-232 or 2 RS-485
I/O port: reserved
SIM slot: 2 SIM slots, redundancy backup, support 1.8V/3V SIM card
Antenna interface:
l 2 LTE antenna interfaces, SMA-K type (female). Master antenna is used for sending/receiving information; slave antenna is used for receiving information
l 2 WIFI antenna interfaces, RP-SMA-K type (female)
Indicator
WLAN indicator, LTE signal strength indicator, running indicator, alarm indicator, power supply indicator, SIM indicator, LTE indicator, PoE indicator, copper port connection indicator, serial port connection indicator, RLY indicator, DI indicator
Serial Port Parameter
ESD protection: ±15KV
Data bit: support 7, 8bits. 8 bits by default.
Check bit: support No Check, Odd Check, Even check
Stop bit: 1, 2 bit
Baud rate: 300bps-15200bps
RS-232: TXD, RXD, GND
RS-485: Data+(A), Data-(B), GND
Physical Characteristic
Housing: IP30 protection, metal
Dimension (W x H x D): 53mm x 138mm x 110 mm(exclude antenna)
Installation: DIN-Rail mounting
Weight:570g
Environmental Limit
Operating temperature: -40~75℃
Storage temperature: -40~75℃
Relative humidity: 5%~95% (no condensation)
Power Requirement
Dual power supply redundancy, voltage range: 12～48VDC, support non-polarity, reverse polarity protection, built-in overcurrent 2.0 protection
support standard 48V PoE power supply, which conforms to 802.3af/802.3at standard(100m max)
Power Consumption
No-load: 3.38W@24VDC
Full-load: 7.15W@24VDC
Industrial Standard
IEC 61000–4–2 (ESD, electrostatic discharge), Level 3
l Air discharge: ±8kV
l Contact discharge: ±6kV
IEC 61000–4–4 (EFT, electrical fast transient), Level 3
l Power supply: ±2kV
l Ethernet port: ±1kV
l Relay: ±2kV
IEC 61000–4–5 (Surge), Level 3
l Power supply: common mode±2kV, differential mode±1kV
l Ethernet port: ±2kV
l Relay: common mode±2kV, differential mode±1kV
Shock: IEC 60068–2–27
Free fall: IEC 60068–2–32
Vibration: IEC 60068–2–6
Certification
CE, FCC, RoHS
Models
Available Models
100m Copper Port
Serial Port
Antenna Interface
SIM Slot
Power Supply
IRT5300-AW-5T2D-2P12_48
5
2
4
2
12~48VDC
or
48VDC PoE
Resources
Supporting Documents
Name
Version
Date
IRT5300-AW-5T2D QIG
2020–12–31
IRT5300-AW-5T2D datasheet
Statistics comes from a data bank called 3onedata.
V1.0.0
2020–12–17
