Guide To Resurface pools in Westlake village

Swimming pools form an integral part of our homes. A large number of homes in Westlake Village and the neighboring areas have swimming pools in their backyards. A well-designed swimming pool is a treat for the eyes, and a source of refreshment.

Pools built outdoors are exposed to extreme weather conditions such as rain, heat and frost. The weather in Westlake can be very rough in summers and winters. While a pool is usually designed to survive such conditions, there comes a point when the pool surface cannot withstand the vagaries of nature anymore. For example, when temperature in Westlake Village falls below freezing conditions, pool water solidifies, and the expansion of ice can cause cracks in the pool surface.

It’s not that weather alone is responsible for surface problems.

Improper maintenance of the pool, or leaving it unused for a very long period also result in similar consequences. Such state of the pool calls for resurfacing, which can be done by hiring a suitable firm for pool resurfacing in Westlake Village.

Resurfacing can be seen as an opportunity to make some cosmetic changes to your old pool. Firms which offer pool resurfacing in Westlake Village provide a variety of material options for resurfacing, such as tiles, plaster and stone aggregates.

The steps followed while resurfacing a pool are:

• The pool should be completely drained and drain plug removed before starting any repair work. It is necessary to keep the pool dry during the resurfacing process to prevent hazards for workmen while using electric tools.
• It is necessary to remove hollow spots in the pool to prevent further damage to the pool surface. The workers move all around to detect hollow or weak spots beneath the pool surface, and chip them away with suitable tools. This process can take a day or two, depending on the extent of the damage.
• The pool surface is then monitored for flaking in order to decide whether to use sandblast or wet blast for the base surfacing.
• After the above steps, the resurfacing material is the applied all around the pool. Each material has its own method of installation.
• After the surface dries, it is then polished thoroughly with polishing tools.

It is important to remember that no one except workmen should be allowed near the pool, to prevent any damage to the pool or injury to any person.