WPS Setup for Linksys WIFI Extender | extender.linksys.com

WPS Setup for Linksys WIFI Extender — Turn on your Linksys range extender by plugging it into a power outlet. One end of the Ethernet wire should be plugged into the Linksys extender, while the other should be plugged into the router. Make sure your PC is connected to a working WIFI network. Open up a web browser of your choice.

LINKSYS EXTENDER SETUP | extender.linksys.com

WIFI range extenders are the ideal solution for a poor WIFI connection at home or at work. And Linksys is a renowned maker of wireless extenders that are not only simple to install but also to maintain. You’ve come to the correct spot if you want to set up a Linksys extender. You will learn how to correctly set up your range extender in this article.

LINKSYS EXTENDER SETUP — REQUIREMENTS

The LinksysWIFI range extender extends any router or access point’s wireless signal to enable internet access in difficult-to-reach areas. Here is a list of things you’ll need to manually configure your Linksys range extender:

· The extender must be activated.

· Take note of the WIFI settings on the current router, including the SSID (or wireless network name), wireless password (or network/security key), and wireless channel.

· Restore your WIFI range extender’s factory settings.

· A functioning internet connection is required.

So, before you set up a WIFI extender, bear these considerations in mind. Let’s look at how to use a Linksys range extender now. Linksys range extender setup may be done in two ways: manually or through the WPS protocol. The next sections go through both strategies in depth. You are free to choose any technique you find most convenient.

Manual Setup for Linksys Extenders | extender.linksys.com

Manually configuring a Linksys extender, the following are the measures to take:

· Place the PC or laptop, as well as the range extender, in the same room.

· After that, use an Ethernet wire to connect your computer to the extender.

· Connect the range extender and PC to a power socket.

· Join it to the setup-xxx network of the extender.linksys.com.

· In a web browser’s address bar, type extender.linksys.com.

· You’ll see a login page appear. To log in, use your credentials.

· When the basic extender. Linksys. Setup page displays, fill up the relevant information using the network name (SSID) of your current router.

· After that, pick the manual option and leave the extender turned off for a while. Now, correctly switch on your range extender.

WPS Setup for Linksys WIFI Extender | extender.linksys.com

WPS (Wireless Protected Setup) is a wireless network security standard that aids in the establishment of stable connections between the extender and wireless devices. Setting up a WIFI extender with WPS may be done in two ways. You may utilize the extender’s physical WPS button or go to extender.linksys.com. Setup and select one of three alternatives.

Using WPS Button

To set up a Linksys range extender using the WPS button, simply follow the steps below:

· Plug the range extender into an electricity or power socket.

· On your extender, hold down the WPS button.

· The state of your Linksys extender setup-XXX network is shown by the WPS LED on your device.

· If your range extender’s power lights turn on, it’s time to configure it with the router.

· The LED lights will turn solid green after a period of time.

· It denotes that the WIFI extender configuration has been finished successfully.

NOTE: Apply the same instructions again if you have a dual-band Linksys extender.

Using the WPS Button on the Web

It gives you three options: WPS button, WPS PIN, and router PIN.

WPS BUTTON

Click the WIFI > WPS button on your Linksys wireless range extender once logged in. To begin the WIFI Setup procedure, tap the WPS button on your device. Then, next to the WPS button, select Enable from the drop-down menu.

WPS PIN

If your device has a WPS PIN, enter it in the second field of the web-based extender setup page. That concludes the procedure.

ROUTER’S PIN

In the third field on the extender.linksys.setup page, enter the router’s PIN if your client device requires it.

The WIFI extender configuration is complete when the WPS light is illuminated continually.

If you have any problems setting up the extender, go back to the factory settings and try again. Alternatively, you may seek immediate assistance from one of our skilled experts to handle Linksys range extender configuration difficulties. We have a dedicated team of professionals on hand to help you with any Linksys WIFI extender setup difficulties you may have.

After Linksys Extender Setup, Check WiFi Connectivity | extender.linksys.com

When you’re through with the Linksys extender configuration, use the Ping Command to check WiFi connectivity. However, make sure that the Linksys extender setup-xxx network is shown in the list of accessible networks before proceeding. After that, follow these steps to check the status of your Linksys range extender’s network connectivity:

· On your computer, open the Command Prompt.

· Now, hit the Input key to enter the IP address of your Linksys range extender.

· It suggests your Linksys WIFI extender setup was successful if it shows data transfers.

· On the other hand, if it says ‘no data transfers’ or ‘disconnected,’ your extender’s software is probably out of current. In this scenario, upgrade the firmware on your Linksys extender to the latest recent version.

Linksys extender setup-xxx will be the expanded network for your WIFI extender. As a result, by following the methods above, you can determine whether or not the expanded network is up to par. Contact our technical specialists right away if you run across any problems.

LINKSYS EXTENDER SETUP TROUBLESHOOTING

Whether you’re having trouble setting up or configuring your Linksys Extender SetupTroubleshooting techniques will come in handy:

· First, double-check the position of your extension. Place the WIFI extender in an appropriate location away from electronic appliances, solid walls, metal objects, refrigerators, and cordless phones not only during the setup procedure but also thereafter.

· Check to make sure the wall socket where the extension is plugged in isn’t damaged or short-circuited. Try connecting your extension into a different outlet.

· Examine the state of your extender’s power LED lights.

· Check whether or not your internet connection is active. If you want to reach the extender setup page, don’t utilise a nearby WIFI connection.

· Maintain a vertical line between the extender’s antennae.

· For extender.linksys.setup, make sure you’re using the most recent browser version.

· When connecting to the Linksys extender setup-xxxx network, use the right username and password.

You can quickly resolve difficulties with your Linksys WIFI range extender by following these troubleshooting recommendations. However, if you’re still having trouble setting up an extension, don’t hesitate to call our specialists for immediate assistance.