Tips To Keep In Mind While Installing Cell Phone Signal Booster

Bad cell phone signal can not only hinder your communications but can also render your favorite cell phone and smart phone gadget useless. There can be several reasons for poor cell phone signal including the weak signal from the service provider, location of the building you work or live in, natural obstructions such as hillocks or buildings blocking the signal etc. When you receive poor cell phone reception at your home or work, it is often a wise choice to install cell phone signal boosters. In recent years the uses of signal boosters has spread like wildfire and have become one of the hottest selling products in the consumer market and the market is expected to grow even greater in the coming years.

According to several experts and market analysis, more than 70 percent of the potential buyers in the cell phone market are totally untapped and with the growing problems with the cell phone networks the sales in cell phone boosters is expected to rise. Nevertheless, several dealers and users need to be well versed with the products and must keep in mind the following tips when it comes to the installation of these devices.

1). Separation Requirement Between Antennas

Two antennas when placed in close proximity to each other is definitely not a very good idea if you’re looking to improve your cell phone signal. While the newer, digital boosters do not require an external antenna, there should be at least 70 feet distance between two antennas. Proper distance should be maintained between the placements of the antennas, especially when multiple signal booster units are installed.

2). Plot Placement Location Before Deployment

Putting the signal boosters without properly testing and plotting out signal availability is not only an unadvisable thing but can also cause trouble in the later years with signal reception. It is important to strategically plot the antenna or the booster placement in your house before the final installation. This seemingly simple task not only improves the signal but can also eliminate the problems with the antenna separation. Make sure you locate and plot out the places inside the house or workplace with the best 3g or 4g signal before placing the amplifier unit in the building. Keep checking the signal bars on the amplifier unit to know more about the signal availability in a particular area of the building.

3). Make Use of the Gain Control

While the latest FCC requirements will call for a tighter gain control, it is important that one must learn to use the gain control to his advantage. The system should be tuned to their best condition to allow a proper signal in the facility the booster is installed in.

4). Placement of the Booster Unit

The amount of signal amplification depends on the amount of the signal received by the booster. Hence, it is essential that you place the unit at a place where the signal strength is the best. The amplifier unit should be kept away from the antenna unit for best results. But one must also know that every 100 feet of cable added will decrease the decibel strength by 3 — 4 units. Too much cable added to the antenna and your signal booster can be rendered ineffective. Make sure you plan out the number of units you need to install in order to receive proper cell phone signal.

One needs to properly understand the basic functions and principles on how cell phone boosters and Wilson Amplifiers work before their installation for the best results. The separation requirements, gain control, plotting deployment locations and knowing the basic distance between the amplifier unit and the antenna unit need to be kept in mind before any sort of installation. The dealers and the buyers must be well aware of the installation requirements to avoid problems later.

One clap, two clap, three clap, forty?

By clapping more or less, you can signal to us which stories really stand out.