When searching for an ECU reading and writing tool, chances are you’ve encountered ECUHELP KT200. However, the abundance of counterfeit products in the market can make it difficult to discern the authentic one. In this article, we’ll outline six characteristics that set the real KT200 ECU Programmer apart from the fake versions.
1. No need to change the computer time when the software is running
The first and most apparent feature of the real KT200 is that you don’t need to change your computer time when the software is running. If you’ve purchased a fake product, you may notice that the software prompts you to change your computer time to an earlier date to continue using it. The real KT200 does not require any such adjustments.
2. Software does not need to register and activate.
Another feature that distinguishes the real KT200 programming device is that the software does not need to register and activate. Once you’ve installed the software, you can use it right away without any further steps. If you’ve purchased a fake product, you may be prompted to enter a serial number or a product key to activate the software.
3. Compatible with any PC (no limit volume of PC)
The real KT200 is compatible with any PC, and there is no limit to the number of computers you can install it on. If you’ve purchased a fake product, you may find that it only works on a specific computer or that you can only install it a limited number of times.
4. Full version can run both on online mode and offline mode
The real ECUHELP KT200 Full Version can run in both online and offline modes, providing you with flexibility and convenience. Fake products may only work in one mode or the other, limiting your ability to use the software effectively.
5. ECUHELP KT200 is built-in with one green encrypted chip board
The real KT200 tool features one green encrypted chip board built into the hardware. This chip board is a vital component that ensures the software runs correctly and securely. Fake products may not have this chip board or may have a different type of chip board.
6. Show your ID (back of the machine) to your dealer to confirm
Finally, to confirm that you have the real KT200, you can copy the machine ID located on the back of the machine and show it to your dealer. If you’ve purchased the product from our website: kt200.co.uk, you can confirm your ID by contacting them on WhatsApp: +86–18123844672
In the end, when purchasing the KT200 ECU tuning tool, be sure to look out for the above six features to ensure you’re getting the real deal.
For information of KT200 ECU Programmer installation guide, please visit:
ECUHELP KT200 Installation Guide and Frequently Asked Questions