How to Clean & Polish Aluminum Valve Covers at Home with These - 7 Simple Steps

Aluminum valve covers are a common problem for engine mechanics. The most common problem is corrosion and the discoloration from the oxidation process.

1. Clean the valve covers with a rag and water.

2. Polish the valve covers with aluminum foil.

3. Polish the valve covers with a piece of cloth (old t-shirt, for example).

4. Apply some wax to the valve covers to make them shine brighter.

5. Apply some carnauba wax to make them shine even brighter and last longer than just applying wax alone would do the job!

6. Use a paint brush to apply carnauba wax sparingly on the valve cover in circular motions, then wipe off excess wax with a clean cloth or paper towel.

7. Use an old toothbrush or other small brush to get into all of those tiny crevices and clean out any dirt that may have accumulated there over.

Top 5 Tools You Can Use for Polishing Aluminum Valve Covers

It’s important to polish aluminum valve covers so that they last longer and have a better appearance. Here I can suggest you tools that can help you for polishing your valve cover with better result. There are many tools you can use for this purpose, but I’ve narrowed it down to the top 5.

1) Mother’s Aluminum Polish:

2) Turtle Wax T-22:

3) Mothers California Gold Plastx:

4) Mothers Power Metal Polish:

5) Mothers California Gold Plastx Kit

Why is it Important to Keep Valve Covers Looking Great?

The valve cover is an important component of your car. It keeps the engine’s valves and other components from getting wet and dirty in the rain. The valve cover also helps to cool your car’s engine by releasing excess heat through its design.

It is important to keep valve covers looking great because they are an important component of your car that can get dirty or leak if not taken care of properly. Valve covers should be cleaned regularly so that they don’t lose their effectiveness and efficiency. To clean valve covers, use a sponge and some soapy water. You can also use a mixture of vinegar and water. Make sure there is plenty of soapy water to remove the dirt. Don’t forget to dry off with a towel before storing them back in your car.

If your valve covers are in need of replacement, follow these steps:

Remove the valve cover from the car. Remove all of the vacuum hoses and protective caps from around your valves. Clean with soapy water, dry with a towel. Place the old gasket on top of your new valve cover and align it with the holes around your valves. Place one of your bolts over both gaskets, push down firmly to secure them