Tips of Finger Monkey Toy Batteries

Finger Monkey Toy, a cute inductive baby monkey who attracts many kids and even adults. It is the hottest toy that simulates real monkey and it is not a bit worse than the hand spinner. I believe that most people have get a finger monkey toy for kids or themselves. Then, how to install or change batteries in order to ensure normal working?

How to install or change batteries?

Firstly, prepare 4 “LR44 / AG13” button cell batteries. Secondly, lay the finger monkey toy down so that the batteries compartment faces upwards, using a screwdriver remove the screws on the battery compartment cover. Thirdly, remove any existing batteries and insert new batteries according to the diagram. Remember to ensure that the positive and negative polarities match the illustrations inside the battery compartment. Finally, replace the battery compartment cover and tighten screws using the screwdriver. Do not over-tighter.

There are several things about batteries you should notice here:

1.Do not the mix old and new batteries, different types of batteries , alkaline or rechargeable or non-rechargeable batteries of different capacities.

2.Use only fresh batteries of the required size and recommended type.

3.Replace all batteries of the same type/brand at the same time.

4.Before recharging the rechargeable batteries, remove them from the toy.

5.Rechargeable batteries are only to be charged under adult supervision.

6.Do not try to recharge non-rechargeable batteries.

7.Please respect the correct polarity,(+) and (-).

8.Do not dispose of batteries into fire.

9.The supply terminals are not to be short-circuited.

10.Remove exhausted batteries from the toy.

11.Batteries should be recycled or disposed of as per state and local guidelines.

If your finger monkey toy becomes slow and unresponsive, or does not work, try to power off and replace all batteries. The waste batteries are bad for out environment so please do not throw away carelessly.