How to expand Nand Flash for iPad mini 1?
How to expand Nand flash for iPad? There is a client sent us her iPad mini 1 with 16GB and required to expand it to 64GB, how to operate it in in details? This article will take you in details step by step, the picture is the present nand flash capacity.

Repair Process
After removing the motherboard from iPad, cut off the shield cover

Next remove the black glue and use air gun to remove the NAND FLASH. Clean the black glue and tin. Flatten motherboard solder pad, as shown in the picture.

Use the NAND FLASH testing jig to write all underlying data information and series number of the new NAND FLASH. The NAND FLASH testing jig is shown in the picture.

The software operation interface of NAND FLASH testing jig is shown in the picture.

At last, solder the NAND FLASH balls on motherboard and connect computer to root by iTunes, as shown in the pictures.


It is activated and gets into IOS system normally. Check the NAND FLASH storage in “Settings” →“General” → “About iPad”, as shown in the picture.

More repair operation details please read at www.vipfixphone.com
