Cleaner pathways to chemical synthesis via new generation catalysts
The synthesis and manufacture of chemicals, and chemical products, has typically relied on petroleum-based feedstocks. Even hydrogen, often hailed as a ‘clean fuel’ and an important component in many chemical reactions, is sourced from such feedstocks. However, Professor Mark Keane’s research at Heriot-Watt University is developing methods for clean chemical production from alternative, renewable feedstocks. To achieve this, he is designing and developing new generation catalysts that not only open up numerous possibilities in chemical synthesis but also use alternative sources of hydrogen for such reactions.
Many modern materials and chemicals start their lives as fossil fuels. From plastics to petrol, fossil fuels, such as crude oil and natural gas, are still widely used for the extraction and synthesis of many of the chemical compounds we rely on in our daily lives. The problems with this are obvious. Fossil fuels are finite resources and there are environmental penalties associated with their extraction and processing. Potentially increasing fuel prices may make it prohibitively expensive to extract the chemical species that are the essential starting ingredients for many synthetic procedures, such as the manufacture of drugs or polymer materials.
2-butanol dehydrogenation to 2-buanone over nano-scale supported Cu with hydrogen release and use in the selective hydrogenation of furfural to furfuryl alcohol over nano-scale supported Au
Perhaps one of the most surprising compounds to be sourced from fossil fuels is hydrogen. The majority of hydrogen is produced from natural gas in a process requiring very high temperatures that also produces carbon dioxide. Despite the seeming abundance of hydrogen atoms as part of water molecules and hydrocarbons, molecular hydrogen (H2) is actually very rare on Earth as the majority escapes from the atmosphere.
However, hydrogen is a key component in one of the most important types of chemical reaction, hydrogenation. Hydrogenation reactions involve the addition of molecular hydrogen to another compound and are usually facilitated by the presence of a catalyst. These reactions are ubiquitous in industrial synthesis; they are how vegetable oils are processed into fats, such as margarines, or to make paraffins and naphthenes for use as fuels.
The majority of hydrogen is produced from natural gas in a process requiring very high temperatures that also produces carbon dioxide.
With few alternative methods for hydrogen production that are not reliant on the use of fossil fuels, Professor Mark Keane at Heriot-Watt University has been finding ways to modify the catalysts for hydrogenation reactions. This is to both reduce, or eliminate, the need for hydrogen in these reactions, finding new ways of exploiting alternative sources of hydrogen that have a much lower environmental impact.
Biomass feedstocks
One reaction that Prof Keane has been particularly interested in is the transformation of furfural to furfuryl alcohol. Furfural is a molecule derived from biomass, such as corncob and sugar cane, that can be selectively hydrogenated to form highly valuable furfural alcohol used in manufacturing resins, rubbers, adhesives and as a building block for drug synthesis. There are also many chemical derivatives that have numerous applications in polymer synthesis.
Coupled dehydrogenation (of Reactant 1) to give Product 1 with hydrogenation of Reactant 2 to Product 2
The ability to obtain such building block chemicals from non-petroleum sources is of pressing urgency but one of the problems with furfural hydrogenation and processing has been the use of very environmentally damaging copper chromite catalysts. Prof Keane has developed an alternative approach for this reaction, making use of a specially designed catalyst that does not just pose less environmental risk but reduces hydrogen usage in the process.
Hydrogen-free selective hydrogenation
An ideal catalyst is one that selectively promotes formation of the desired reaction product, does so with good efficiency and has the longest possible lifetime before degradation of the catalytic material occurs. For furfural hydrogenation, gold-based catalysts have been used with some success as they have very high selectivity for the desired hydrogenation product.
Use of biomass feedstock in coupled dehydrogenation/hydrogenation for the production of an array of high value products
The major drawback with gold catalysts has been the relatively slow reaction rates, so commercial use of such catalysts also involves using an excess of pressurised hydrogen to compensate for this. The use of highly pressurised gases comes with many safety concerns and a large proportion of the hydrogen used in this way is essentially wasted as it remains unreacted. Prof Keane has been designing so-called ‘coupled catalysts’ that use a combination of metals, such as gold and copper as a solution to this problem. These have increased hydrogen utilisation by several orders of magnitude in comparison to the exclusively gold catalysts.
The reason these coupled catalysts are so efficient is because they combine complementary hydrogenation and dehydrogenation reactions on the two metals present. At the gold site, the normal hydrogenation reaction occurs, but at the copper site, a complementary dehydrogenation reaction occurs to produce the hydrogen required to fuel the reactions at the gold sites. All that is required is a chemical that can act as a suitable feedstock for the complementary reaction.
Future of industrial synthesis
Already, Prof Keane and his group have been able to successfully extend this approach to developing new generation catalysts for other important reactions to generate amines and imines with myriad uses in chemical synthesis. Such coupled reactions offer not just a safer route to large-scale chemical synthesis but also one that allows far more efficient use of hydrogen. Recently, Prof Keane has also been able to demonstrate the use of formic acid, a side product of many biorefinery processes, as a source of hydrogen for such reactions.
Prof Keane’s approach is easily scalable to large-scale, continuous flow chemistry, which is a far more efficient approach to chemical synthesis than the conventional production of single batches. His future work will continue to involve extensive collaboration with industry, tackling chemical synthesis problems of global importance with catalysts that offer routes to far cleaner and greener chemical synthesis and a reduction of our reliance on petroleum feedstocks.
