Wavlink AX1800 Setup

The Wavlink AX1800 is a high-performance wireless extender designed to provide fast and reliable Wi-Fi connectivity for your home or small office. With its advanced AX1800 Wi-Fi 6 technology, it offers enhanced speeds, improved network capacity, and reduced latency for a seamless online experience.

Setting up a Wavlink AX1800 extender is a straightforward process that involves connecting the router to your modem, accessing the extender’s web interface, and configuring the necessary settings. Once set up, you can enjoy high-speed internet access and connect multiple devices simultaneously, including smartphones, tablets, laptops, smart home devices, and more.

Wavlink AX1800 Setup: Steps to follow

The Wavlink AX1800 extender setup is a straightforward process that involves a few simple steps:

• Connect the extender to a power source and your modem using the provided cables.
• Access the Wi-Fi settings on your computer or mobile device.
• Connect to the Wi-Fi network named after your Wavlink extender.
• Open a web browser and enter the extender’s default IP address (e.g., 192.168.0.1 or 192.168.1.1).
• Enter the default username and password to log in to the extender’s web interface.
• Follow the prompts and instructions displayed on your screen to configure the settings of your extender.
• Set up a secure Wi-Fi password and network name (SSID).
• Save your changes and restart the extender if prompted.
• Connect your devices to the newly configured Wi-Fi network using the updated password.
• Test the internet connection to ensure everything is working properly.

By following steps, you’ll have your Wavlink AX1800 router set up and ready to provide fast and reliable Wi-Fi connectivity for your home or small office.

Wavlink AX1800 Firmware Update

To update the firmware on your Wavlink AX1800 extender:

• Check the current firmware version in the extender’s web interface.
• Download the latest firmware from the Wavlink support website.
• Access the firmware update page in the extender’s web interface.
• Choose the downloaded firmware file.
• Start the firmware update and wait for it to complete.
• Verify the updated firmware in the extender’s web interface.

Note: Ensure a stable power supply and do not interrupt the update process to avoid potential issues.

Wavlink AX1800 Reset Procedure

To reset the Wavlink AX1800 extender, follow these steps:

• Locate the reset button: On the back of the extender, find the small reset button.
• Power on the Extender: Ensure the extender is powered on and connected to a power source.
• Pressing the reset button: To initiate the reset process, press and hold the reset button using a pin or a paperclip for about 10 seconds.
• Releasing reset button: After keeping the reset button pressed, let go of it to complete the reset process.
• Wait for the reset process: Allow the router a few moments to reset. The power LED may blink or the Extender may restart.
• Reconfigure the Extender: Once the reset process is complete, you will need to reconfigure the extender settings. This includes setting up a new Wi-Fi password, network name, and any other desired configurations.

By following these steps, you can reset the Wavlink AX1800 Extender to its factory default settings.