Ring cameras have become increasingly popular for their ability to enhance home security and provide peace of mind. These smart devices offer a wide range of features, including night vision capabilities.
However, it can be incredibly frustrating when you experience issues such as the ring spotlight camera night vision not working, the ring floodlight camera stuck in night vision, or the ring stick up cam night vision not working.
In this blog, we will explore the causes behind the Ring camera getting stuck in night mode and provide potential solutions to help you resolve the issue promptly.
Whether you’re dealing with a ring spotlight camera, a ring floodlight camera, or a ring stick up cam, understanding the underlying causes and implementing the right solutions is crucial to restoring your camera’s optimal functionality.
What is Night Mode on a Ring Camera?
Before delving into the causes and solutions, let’s first understand how the night mode feature on Ring cameras operates. Ring cameras utilize infrared (IR) sensors to capture clear footage in low-light or nighttime conditions.
These sensors emit invisible IR light, which is then reflected back to the camera’s lens. The camera’s image sensor converts this reflected light into visible black-and-white footage, allowing you to see clearly even in the absence of visible light.
What Causes Ring Camera Stuck in Night Mode?
Below, we’ve mentioned the probable reasons for Ring camera stuck in night vision/mode issue;
Insufficient Lighting
One possible cause of the night mode issue is insufficient ambient lighting. When the camera does not receive enough light during the daytime, it may mistakenly interpret the low light levels as nighttime conditions, resulting in the camera remaining stuck in night mode.
IR Sensor Issues
Malfunctioning or obstructed IR sensors can also cause the camera to get stuck in night mode. If the IR sensors fail to detect the proper light levels, the camera may not switch to daytime mode as expected.
Firmware or Software Glitches
Like any electronic device, Ring cameras can experience occasional firmware or software glitches. These glitches can disrupt normal camera operations and potentially cause the camera to remain in night mode.
Power Supply Problems
Power supply issues can affect a camera’s functionality. If the Ring camera is not receiving adequate power, it may fail to operate correctly, resulting in it getting stuck in night mode.
How To Fix a Ring Security Camera Stuck in Night Mode?
Ring camera stuck in night mode issue can be fixed by cleaning the IR sensos, restarting the ring camera, updating the Ring camera software to the latest version, or resetting and re-configuring the camera.
Ensure Sufficient Lighting
The first step in troubleshooting a Ring camera stuck in night mode is to ensure that the camera has sufficient lighting to distinguish between day and night conditions.
Check if there is ample natural or artificial light available around the camera’s field of view during the daytime.
Make sure there are no obstructions, such as tree branches or debris, blocking the camera’s view. Removing any barriers will allow more light to reach the camera and help it switch to daytime mode.
Check and Clean the IR Sensors
Inspect the camera’s infrared (IR) sensors to ensure they are not obstructed by dirt, dust, or physical barriers. These obstructions can interfere with the sensors’ ability to accurately detect light levels.
Gently clean the sensors using a soft cloth to remove any debris that might be compromising their functionality.
This will help the camera properly perceive the ambient light and switch to the appropriate mode.
Restart the Camera
Sometimes, a simple restart can resolve temporary glitches causing the night mode issue.
Begin by powering off your Ring camera and unplugging it from the power source. Wait for about 30 seconds before plugging it back in and powering it on. Allow the camera to go through its startup sequence, and then check if it has switched to daytime mode.
Restarting the camera can refresh its settings and clear any temporary software issues that may be causing the problem.
Update Firmware and Software
Outdated firmware or software can cause compatibility issues and unexpected behavior, including the camera getting stuck in night mode.
To ensure your Ring camera is running the latest version, visit the Ring website or the Ring app. Check for any available updates specifically for your camera model and follow the provided instructions to install them.
Updating the firmware and software can address potential bugs or glitches that may be affecting the camera’s functionality.
Reset and Reconfigure the Camera
If the issue persists, performing a factory reset on the camera may help resolve software-related problems.
However, keep in mind that a factory reset will erase all your camera’s settings, and you will need to set it up again from scratch.
To factory reset your Ring Security Camera, follow the steps as instructed below;
Ring Stick Up Cam (1st Generation):
- Lift the small cover on the back to access the orange setup button.
- Press and hold the orange setup button for 20 seconds.
- The camera’s light will flash for several minutes and turn off when the reset is complete.
Ring Stick Up Cam Battery (2nd Generation):
- Remove the battery cover.
- Locate the orange setup button near the battery slot.
- Press and hold the Setup button for 10 seconds.
- The camera’s light will flash for several minutes and turn off when the reset is complete.
Ring Stick Up Cam Battery (3rd Generation), Ring Stick Up Cam Plug-in:
- Remove the battery cover.
- Find the orange setup button near the battery slot.
- Press and hold the Setup button for 10 seconds.
- Once the reset is complete, the camera will enter setup mode.
Ring Spotlight Cam Battery:
- Locate the Setup button on the top of the camera.
- Press and hold the Setup button for 10 seconds.
- The camera’s light will flash for several minutes and turn off when the reset is complete.
Ring Indoor Cam, Ring Spotlight Cam Wired, Ring Spotlight Cam Pro, Ring Spotlight Cam Plus, Ring Stick Up Cam Elite, Ring Floodlight Cam, Ring Floodlight Cam Wired Plus, and Ring Floodlight Cam Wired Pro:
- Find the setup button on the top of the camera (or under the back cover for Ring Stick Up Cam Elite).
- Press and hold the Setup button for 10 seconds.
- Once the reset is complete, the camera will enter setup mode.
Remember to remove the device from the Ring app if you are giving it to someone else. To do this:
- Tap the gear icon for your Security Camera on the home screen of the Ring app.
- Go to Device Settings > General Settings.
- Tap Remove this Device.
Note: Completing this step is essential for the new owner to set up the Security Camera successfully. Resetting the camera can often eliminate persistent software issues and restore it to its default settings.
Contact Ring Support
If none of the above solutions work, it is advisable to reach out to Ring’s customer support for further assistance.
Their knowledgeable team of experts can guide you through advanced troubleshooting steps tailored to your camera model. They can provide additional troubleshooting options or suggest potential hardware repairs if necessary.
Contacting Ring support ensures you receive expert guidance to resolve the issue effectively.
FAQs
How do I change the night mode on my Ring camera?
To change the night mode on your Ring camera, you don’t have to manually switch it. The camera automatically detects light levels and switches between day and night modes.
Why is my Ring Doorbell on night mode?
Your Ring Doorbell switches to night mode when it detects low light conditions, allowing it to capture clear footage even in the dark. This is a normal and expected behavior.
Why is my Ring camera suddenly black and white?
If your Ring camera is suddenly displaying footage in black and white, it means it has activated its night vision mode due to low light levels. Night vision helps capture better details in low-light environments.
How do I get my Ring camera out of setup mode?
To get your Ring camera out of setup mode, ensure that you have completed the setup process correctly. If the camera is still in setup mode, try power cycling it by unplugging it, waiting for a few seconds, and then plugging it back in.