Blink Camera Red Light | Blink Camera Flashing Red | Blink Camera Offline

The Blink Camera Red Light means that your camera is no longer connected to the internet. This could be the only possible reason why your Blink Camera Connected but Not Working. Hence, check your wifi device and fix the issue as soon as possible, if found any.

Actually, it’s not always clear what is the real cause that Blink camera has stopped recording. Sometimes, it’s the faulty internet while other times loose cable connections could be responsible.

In this guide, we are going to arrange all the troubleshooting methods to resolve the red light issue on the Blink camera. For an immediate solution, dial the Blink Camera Customer Service Phone Number now.

Blink Camera Red Light Issue: Possible Reasons

We have researched and found two main reasons why you are facing the Blink Camera Red Light issue.

1. It may be possible that your wifi has stopped working or your internet is very slow. This is why there is a red light on the blink sync module. Hence, you need to check the wifi connection and resolve the issue as soon as possible.
2. If you are doing the Blink Camera Setup then your Blink camera flashing red light at the initial stages. Don’t worry, this light will disappear after a while.

If your blink camera flashing red light because of the first reasons then follow the steps mentioned below.

Steps to Fix the Blink Camera Flashing Red Light Issue

If your Blink Camera Blinking Red light then you must check your wifi connection in the very first place. Then, restart the router and your security camera to fix the red light issue. Here are the troubleshooting methods to resolve the issue:

1. Check Your Internet Connection

We have already told you that a faulty wifi connection is one of the major reasons behind the Blink Camera Red Light issue. So, it is necessary to check the internet connection first. You need to call your internet service providers if you find anything wrong.

2. Restart the Router

Restarting is one of the best ways to tackle technical glitches. So, remove the power adapter from the power source and then wait for at least 10–20 seconds. Now, connect the power adapter again. Turn ON the router and let it connect to the Blink security camera.

3. Check the Batteries

Make sure that you have inserted the batteries in the right manner. In addition to this, replace the faulty batteries with new ones.

4. Move the Base Station Close to the Router

You may have placed the base station far from the router and this is why you are facing the Blink Camera Red Light issue. So, minimize the distance between the base station and router to resolve the sync module offline blink camera problem.

5. Power Recycle Blink Security Camera

Power recycle the Blink camera by removing the power cable from the wall outlet. Wait for a while and reconnect the power recycle. Turn ON the Blink camera and check if the issue gets resolved or not.

6. Reset Blink Security Camera

In order to reset the Blink security camera, long-press the reset button on your Blink camera. You have to take the help of a thin pin-like object to press the button. Hold it until the camera will not restart completely. Once the device will be reset successfully, turn it ON and check if the Blink Camera Red Light issue gets resolved or not.

Conclusion

To resolve the Blink Camera Red Light issue, make sure that your wifi device is working perfectly. In this guide, we have told you all the steps to troubleshoot the red light flashing problem. If you are still facing any kind of issue then dial the given Blink Camera Customer Service Phone Number now.