Quick steps for HP Officejet Pro 8035 Printer Setup

Alexooopauloo
2 min readJan 8, 2022

--

Quick step-by-step instructions for HP Officejet Pro 8035 Setup. Also, get the complete solution for HP OJPRO 8035 troubleshooting process.

Installing The Ink Cartridges:

  • Open the front cover and the ink cartridge access door.
  • Wait until the carriage stops moving.
  • Unpack the ink cartridges.
  • Remove the protective seals and caps from the cartridges.
  • Insert each cartridge into the carriage and close the ink cartridge access door.
  • Close the front cover and tap OK on the LCD.

Loading Paper:

  • Open the paper input tray and slide apart the paper guides.
  • Insert a paper stack into the tray and adjust it with the paper guides.
  • Push the tray back into the printer and tap OK to print the alignment page.
  • Scan the alignment page to align the print head.

You have now completed the hardware for your HP OfficeJet Pro 8035 setup.

Software Setup:

If your printer package has a software installation disk, insert it into your computer and run the setup file to start the driver installation. Otherwise, download the driver from the official HP site and run the driver installation. Once you complete the driver installation process, print a test page to verify the printer functionality.

HP Officejet Pro 8035 Printer Installation

You can install either HP Easy Start or HP Smart on your computer to get the most out of your HP OfficeJet Pro 8035 all in one setup. Here, we have given the steps to install the HP Easy Start software on a Windows computer.

  • To begin with, download and run the HP Easy Start software.
  • If the device prompts for User Account Control, click the Yes button.
  • Click Next on the Welcome screen.
  • Accept the EULA and click Next.
  • Connect your printer to your computer using a standard USB cable.
  • On the Printer found screen, check if your printer is listed.
  • If your HP OfficeJet Pro 8035 printer is not listed, click on My Printer is Not Shown.
  • Carry out the on-screen instructions and connect your printer to the computer.
  • Install the required software by selecting them in the driver installation wizard and click Next.
  • Finally, print a test page to check if you can access your printer from your Windows computer.

--

--

Alexooopauloo
0 Followers

Hi! I’m Adriana, a Tech Supporter For 5-years in Top MNC Company. Here l will Provide expert step-by-step Troubleshooting (solving) Methods.