setup.ampedwireless.com sr10000-How to Login to the Amped R10000

To login to your Amped R10000 Wireless router on your computer, you will need to connect your computer on your Amped router. You can use any updated web browser for login into the web homepage to configure router wireless settings like firmware update, change admin and WiFi password, network name, create a guest network, parental and security control, etc. Please walk through the below typed basic steps to log in directly into your Amped router management page.

Important Notes:

If you are logging in for the very first time, please connect your computer to the router through Ethernet cable.
Disable any third-party Firewall on your computer.
Make sure that your computer is not connected to any other wireless network.
It is recommended to always use

Basic steps to log in to your Amped R10000 router.

Open any web browser on your device that is connected to the Amped router network. We recommend you use the Google Chrome web browser.
In the web address bar, type http://www.setupampedwireless.com or setup.ampedwireless.com you can type in the IP address 192.168.3.1. This URL will redirect you directly to the login screen of your router.
Login screen prompted.
Enter login details. In both login and Password field, please enter admin in lower case. These are the default login credentials for your Amped router.
In case you change the login credentials before, please enter the updated one.

Troubleshooting Tips

In case you are not able to login to the Amped router on your computer. Please try following troubleshooting steps.
Make sure all the cable on modem and router are properly connected.
Try to open the URL with a different browser.
Power Off your modem and router. Turn them On after 15 seconds and try again with the same basic steps.
The IP address of your router and modem should not be the same.
You can also try on another laptop or computer that is wired connected to your router.