How to place Ceramics Tiles on a wall

Andrea
Andrea
Aug 26, 2017 · 3 min read

Ceramic tiles are a versatile and durable finish. They can be installed as a floor or wall to cover almost anything, but are especially useful for bathing and cooking. Tiled walls resist humidity and are much better cleaned than plaster walls or other materials, making them the ideal choice for bathrooms and wet kitchens where they are exposed to splashes.

ceramic tiles (מנגל גז)

Learning how to install ceramic tiles (מנגל גז) is within the possibilities of any home owner. The process only requires some tools and materials. That is why today we begin with a short course that will take you step by step through the correct process of placement of ceramic tiles. Without further ado, let’s do this:

Make sure the wall is ready. When you have removed the current cover and wall fixtures, it is advisable to check the base on which you install the tiles to ensure that the structure is solid. This is important because a weak or rotten wall can cause the tiles to crack, deform or even break and fall.

  • Look for signs of mold or damage to the surface where you will place the tiles. Often, cracks are a sign that a wall is weak or needs replacing.
  • Try pressing the wall, especially on the support tables. If you give up or feel soft, it may require additional work.
  • If you are going to put tiles in a large area, remember to use a support panel not to place them directly on the wall. [1] Tile stands are installed the same as plaster wall (with nails in support tables), but are made of a more water-resistant material that will prevent tiles from cracking or deforming.

And so we arrive at the fourth installment of our course of ceramic tile placement on a wall, at this point we must raise the tiles dry and cut them of the appropriate size with a saw in wet diamond. Lock the tiles dry to make sure they look the way you want. When you are satisfied, decide how the tiles will meet the corners and edges of the wall.

You may need only a portion of tile for these areas, so you will have to cut it to size. Measure the space required for each row with the spaces and cut the tiles with a wet diamond saw.

  • For example, let’s say that the wall where you place the tiles is 1.5 meters (5 feet) in length and that you install white 6 “(6 cm) ceramic tiles with 1/4 inch (6 mm) spaces between they. You need 9.6 tiles per row to cover the space, which means you’ll use 9 full tiles and one cut to 9 cm (3.6 inches).
  • If you do not have a wet saw with diamond tips, you can rent one of the large hardware stores. You can also buy a tile cutter, but you’re more likely to end up with broken tiles, so opt for this option only if you use cheap tiles.
  • Dry ironing is particularly important if the tiles form a pattern, as you should feel very satisfied with it. Surely you do not want to make a mistake or have to think hard when the mortar is on your wall.
  • You can test the dry pattern with a positioning rod, which you can create from any piece of straight and level wood. Lay the tiles on the floor and mark the stick with a pencil on the tile joints. Use the rod to see how the tiles remain on the wall.

)

Andrea

Written by

Andrea

I am a writer

Welcome to a place where words matter. On Medium, smart voices and original ideas take center stage - with no ads in sight. Watch
Follow all the topics you care about, and we’ll deliver the best stories for you to your homepage and inbox. Explore
Get unlimited access to the best stories on Medium — and support writers while you’re at it. Just $5/month. Upgrade