How can you Prepare For Asbestos Removal?
Asbestos removal is definitely a sensitive undertaking, which requires high precautionary standards. The preparation phase is particularly critical in avoiding adverse health effects on workers and house occupants.
This is a simple guideline a qualified specialist would follow when preparing for elimination of friable products (asbestos containing material in powder form), depending on information in the Australian Department of Education, Employment and Workplace Relations:
1. Preparation For Removal Project
Before you attempt to do anything, you must follow these preparatory procedures:
- You ought to first obtain an asbestos removal control plan (ARCP), as well as the work instructions.
- To be sure the highest standards of safety and compliance of the project, an on-site assessment should be performed. Relevant data may also be sourced from a preexisting asbestos register.
- It is necessary that calculations are made from the specified quantity of materials, based on the quality requirements, specifications and plans.
- Applicable environmental requirements must be identified so your project can abide by all regulatory obligations.
- The health of workers mixed up in project must be preserved. Therefore, you ought to apply all processes necessary in meeting health surveillance requirements. This too involves air monitoring.
- Authorization may then be obtained (determined by company and legislative requirements) after finishing the preparation phase.
- All workers mixed up in project must be provided with personal protective gear (PPE) which is like job. Such equipment must be checked for faults beforehand.
2. Preparation Of Removal Area And Site
As soon as the project has become authorized, following initial preparation phase, a second preparation of the actual web site is necessary. This involves these activities:
� The particular materials containing asbestos needs to be identified and also the asbestos register checked.
� Having identified the objective materials, you may then implement signage and barricade procedures. This really is necessary in delineating work areas within the site; hence preventing unwarranted access by unqualified persons.
� Obviously, it’s also advisable to create the decontamination unit before beginning the job.
� In addition, you need to test the decontamination procedures, in order to ensure their effectiveness, while ruling out chances of error.
� Similarly, all equipment and materials which will be found in removing asbestos containing material (ACM) needs to be checked prior to the operation.
� It’s critical that adjacent utilities are assessed beforehand. Such utilities as power lines and water pipes might need deactivation, containment or diversion. It will avert avoidable risks.
� The code of practice and applicable legislation would also need you to notify all occupants in the building, neighbors and any other person who could be suffering from the operation.
3. Enclosing The Removal Site
This is actually the last step associated with preparation for your removal project. Various activities involved include:
- You need to identify the most suitable enclosure type and removal process, for a way extensive the removal project is.
- Since friable products are potentially more harmful than non-friable products (ACM in solid form), stricter enclosure procedures would be required.
- After a particular enclosure type is chosen, you should ensure that negative air pressure is maintained inside it, in compliance with legislative requirements. It should be also inspected and smoke tested to make certain that it’s completely air-tight.
- After completing every one of these preparatory procedure, an authorized assessor ought to be notified of the proposed asbestos removal project.