Techniques to Repair Copper Water Lines

Not each DIY home repair project requires expertise in all areas to have positive results. The people who wish to figure out how to repair copper lines find out that this is a project that is not difficult. Once the basics are found out it is very easily accomplished. Below, is listed a step by step instruction of how to repair copper water lines.

1. Once your pipe is cut to length you will need to fit it into position to make sure that it will fit appropriately. By fitting the copper piping into position to begin with, will allow for proper flow and not get to be obstructed in any way. Disgracefully attempting to force the material can make leaks.

2. The surface toward the end of the copper pipe that will be welded should have its surface opened up to accept the solder easily when a hot flame is set up to it. This is effectively and immediately fulfilled with Emory fabric or steel wool. It is also an incredible thought to get out the fitting that will get to be appended to it. This will protect that a good bond is made.

3. To eliminate the chance of future leakage, soldering flux should be included before the weld. This will make the solder hold all the more successfully. This extra step helps guarantees a much more tightly bond and will help out later down the road.

4. Next, you need to fit the pipe and fitting together, and after that place the heat on the area to be welded. Once the flux has been directed, the time has come to start the soldering stage. You will need to let the flame move around the area for around 10 seconds.

5. By utilizing around a half inch of solder at a time will allow the copper not to have an excess of welding material on it. Once the solder starts to trickle, the time has come to move it to the following area that requires welding, or just turn the flame off. That is all it takes. Learning how to weld copper pipe is easy. It might take some practice at initially, but once you get the hang of it, it will become natural to you.

When you figure out how to repair copper water lines, you’ll find yourself taking on other DIY home repair projects too. Welding is cool to do. A great deal funner than sticking PVC pipe together! In addition, you won’t get ripped off by an overvalued plumber!
When a copper water pipe corrodes and leaks, or bursts from freezing, you have to fix it fast. If the leak is pinhole-sized and less than 1/2 in. of pipe must be removed, you can make the repair by cutting the pipe and welding on an ordinary pipe coupling.http://pipemanproducts.com