5 Tips to Improve Asphalt Paving Quality
You can say that asphalt paving in Surrey is of high quality if, after heavy rains and snow, it still remains intact. When asphalt paving in Surrey isn’t installed properly, cracks and potholes can appear even after just a few seasons of use. You don’t want to waste money on asphalt paving in Surrey. It’s important that installation is done correctly and that materials are inspected thoroughly to get more out of your asphalt paving.
Here are some tips on how asphalt paving quality can be improved:
1. Equipment, tools, and set-up needed for asphalt paving in Surrey must be in good condition.
You can tell that you are dealing with a good paving contractor if they inspect their equipment and tools stringently. Paving machines play a critical role to this task so it’s important that they are checked not only to ensure that the job is done but also to ensure the safety of the people working to get the job done.
Maintenance should also be done to paving equipment. Release agents should be applied to the areas of the machinery that get in contact with hot asphalt. Some machines already automatically do this or you can push a button and the parts are automatically coated with the release agents integrated in them.
Contractors should also set the screed to the specific project details such as the slope and thickness of the crown to ensure fast and fluid performance from the machines.
2.Head of material should be sufficient.
Contractors refer to the paving mix mass that is in front and spans the screed as “head of material”. It’s important that it remains consistent during paving work, otherwise, you will be left with uneven and unsmooth surfaces. If the head of material increases, for instance, the thickness of the mat also increases, thereby creating uneven surfaces and creates flaws that will require correcting later on. Thankfully, many machines these days are already equipped with systems that allow operators to easily check their head of material.
3.Maintain good paving speed.
Go too fast or too slow and you just might have irregular thickness of mat. If you can see waves or ripples on the surface of the paving, this is usually a result of improper pacing.
4.There must be adequate compaction.
Good compaction techniques allow the asphalt paving to last for a long time even when subjected to heavier loads and a good amount of traffic.
5.Mat temperature should be correct.
Contractors should carefully monitor the mat temperature. The right temperature will be dependent on environmental factors such as the season and ambient conditions.
When having a road or driveway paved with asphalt, see to it that you are working experienced contractors such as Blackstone Paving Inc. so you can have the best results.
Aaron Brown is the author of this Article: To know more about asphalt paving Surrey please visit the website.