Symptoms Of Gear Shift Cable Failure
What is a gear shift cable and what purpose does it serve? Gear shift cables are integral parts of every vehicle and are used to link the transmission and gear lever. All vehicles, both with automatic as well as manual transmission, have this cable. The failure of the gear shift cable could render the linkage between the gear level and transmission ineffective. This is the time when you need to find a replacement for gear shift cable. It is very important to know about the symptoms of a failed shift cable. This article will discuss the same for shift cables in vehicles with automatic transmission.
Automatic transmission comes with one gear shift cable that is present from the shifter assembly to the transmission. There are signs that tell that they have started going bad. If you think that the one on your vehicle is in a similar position, you should look out for these symptoms.
Gear indicator doesn’t show the actual gear. When the shift cable is on the verge of failure or has started showing signs of going bad, the gear your vehicle is on at a particular moment won’t match the gear indicator cable or light. It would be better for you to understand it with an example. If you move from drive to park or vice versa or shift to any other gear, the gear indicator won’t indicate the right gear. This happens when the cable has already stretched too much and is in no position to reach the correct spot. It is common for these cables to be stretched over a period of time. If this is the case, you should start looking for a replacement as soon as possible.
The vehicle won’t start in park or neutral. If something of this sort happens, you should know that there is a problem with the gear shift cable. However, this problem could either be with the shift cable or the shift interlock solenoid. So, it is always better to get it diagnosed by a technician. There could be a problem with both of these parts. So, depending on the diagnosis and its findings, you should get one or both the parts replaced as soon as possible.
The gear selector of your vehicle doesn’t move into gear. If this happens, the gear shift cable has either stretched too much or is completely broken. The leverage required for changing gears isn’t available anymore. Replacement of the gear shift cable is the solution.
Author’s bio: The author is a blogger. This article is about gear shift cable.
