Lexmark printers produce high-quality prints with sharp text and vibrant colors whether you’re printing documents, photos or graphics.
Check the points below to see the Lexmark Printer information in details are:-
Step 1: Power Cycle the Printer
Turn off the printer and unplug it from the power source. Wait for about 30 seconds to a minute. Plug the printer back in and turn it on. Check if the error persists.
Step 2: Check the Fuser Unit
Turn off the Printer and unplug it from the power source.
Access the Fuser Unit: Refer to the printer’s user manual to locate and access the fuser unit. This often involves opening a rear or top cover.
Inspect the Fuser Unit: Check for any visible damage or signs of wear. Ensure the fuser unit is properly seated and installed.
Reinstall the Fuser Unit: If the fuser unit appears to be improperly installed remove it and then reinstall it securely.
Step 3: Verify Power Supply
Ensure a Stable Power Supply: Make sure the printer is plugged into a stable power outlet. Avoid using power strips or surge protectors temporarily to rule out power issues.
Check for Voltage Fluctuations: Ensure that the power supply is consistent and there are no significant voltage fluctuations.
Step 4: Replace the Fuser Unit
Obtain a Replacement Fuser Unit: Purchase a compatible fuser unit for your Lexmark printer model.
Install the New Fuser Unit: Follow the instructions provided with the replacement unit to install it correctly.
Step 5: Reset the Printer
Reset to Factory Defaults: Navigate to the printer’s settings menu. Find and select the option to reset the printer to factory defaults. Note that this will erase all custom settings and configurations.
Step 6: Check for Firmware Updates
Visit the Lexmark Support Website: Go to [Lexmark Support](https://support.lexmark.com).
Search for Your Printer Model: Enter your printer model in the search bar.
Download the Latest Firmware: Locate and download the latest firmware for your printer model.
Update the Firmware: Follow the instructions to update the printer’s firmware.
Step 7: Contact Lexmark Support
If none of the above steps resolve the error contact Lexmark Support for further assistance. They can provide more detailed troubleshooting steps or arrange for a professional repair.
Step 8: Summary
1. Power cycle the printer.
2. Check and reseat the fuser unit.
3. Verify the power supply.
4. Replace the fuser unit if necessary.
5. Reset the printer to factory defaults.
6. Check for and install any firmware updates.
7. Contact Lexmark Support if the issue persists.
Note:-
By following these steps you should be able to troubleshoot and potentially fix the Lexmark Printer Error Code 917.00.
