major studio, is it week 2 or 3..

anyway, this is me testing the liquor spout, also I had hard time finding the right piece to link between the spout and the hose that I have in the valve. I went to many different hardware stores so I found that there is a “hose bar.” It is a black thing that is attached in the bottom of the spout.

testing if it leaks or not.. leaking a little bit but I guess it’s ok..

placing the liquor spout , hose bar, hose with valve together

So I was working on the valve which opens when the electricity go through. However, I spent a lot of time figuring out how to make the valve automatically close. I couldn’t get it to work.

So instead, I’ll use servo that hits the button to let the electricity go through, because I can control the servo’s second when to let it go. For example, I can set the servo to push the button for 2 sec and let it go.

(my brain is getting mad..)so I spend a lot of time thinking how to place the servo on the button so that it can push the button in the right way(as you can see, the servo rotates, so I want the servo to do the pistol motion, not rotate..)

My friend told me, make the servo starts from the angle of diagonal so when you hit the button, it stays flat. There you go, very simple answer that I sought for like 2 days.