Some tips about replace new NAND Flash to expand Apple iPhone memory

If you need expand iPhone memory by replacing new NAND. Vip Pro Shop Team prompts you that this process requires professional knowledge and experience, and need high quality phone repair tools.

First disassemble iPhone with screwdrivers and then take out the motherboard. Remove the original glue around the 16GB NAND with hot air gun,after removing the glue, keep using hot air gun on the NAND, until you can pry off the 16GB NAND.

When you take out the 16GB NAND, you need to cool iPhone motherboard. In this time, you can use WL PCIE or Pro 3000s nand flash programmer to write previous data to a new NAND flash. The first step is install the old Nand flash on NAND flash programmer and then start it, when finish “back the original data” by software at a regular path, take out the old NAND, install new NAND on it, and then select right button to copy the data, take it out after finish it.

Solder tin with BGA Reballing stencil on new NAND, and then put this new NAND onto the corresponding position. Use hot air gun to heat it till it’s soldered steadily.