Right Way to Apply Touch Up Paint To Your Ford

Who doesn’t want to protect their luxury Ford? When your car is worn out, a fresh touch up paint is required. Finally, your decision to apply the Ford touch up paint when you see some deep scratches over your car. But, you don’t know how to apply it, which things to consider, and how much time it will take. But, here we have the things that will help you apply the fresh coat.

How to Apply

Using A Touch-Up Jar

You should bring touch up jar when the repair job at hand covers, an area larger than the eraser on a pencil. The jars have a tapered brush tip and specially developed ergonomic cap. It makes this item particularly useful when controlling the flow of paint for those larger-scale jobs. It helps in applying the coats that are even, light and consistent. Avoid applying one thick coat as it will clump. Keep the gap of several minutes between light coats.

Using A Touch-Up Pen

If you want to apply Ford touch up paint, just in a right amount, bring the touch-up pen. Pens are the ideal way to deliver the right amount of paint. So, you can use them over small imperfections such as dings, minor scratches and impact flecks that are the inevitable result of day-to-day driving.

Don’t press hard with the pen while you are applying your paint. Although doing this seems like the best way to get the paint absorbed into the surface, the pen tip will be damaged. Also, it will make the job difficult. Furthermore, it will actually compromise the appearance of lower coats of paint that you have recently applied.

Using A Touch-Up Can

Choosing a spraying can is a great choice when you need to paint a larger area such as an entire panel. Here, neither a touch-up jar nor a touch-up pen will be the right tool for the job. Choosing Ford touch up paint can is the right method of delivering paint which will enable you to cover a larger area more evenly and effectively. It will save your great deal of time.

Here are some tips to consider while doing the job:

1. Shake your water-based aerosol lightly, shake urethane-based paint well, before using.

2. Use a piece of cardboard or a test card, before attempting it on your car.

3. Keep a distance of six to eight inches from the surface and the can.

4. Applying the light, even coats of paint will reduce drips and runs.

5. Move in a back-and-forth pattern left to right and repeat it, and leave half an inch of overlap on each pass of the spray.

6. Between coats, allow 15 to 30 minutes to dry the paint.

7. Do it in dry and cool season, as the rain, wind or sun can affect it or may damage.

8. Give the area a polish and wax to provide an added shine, after about 48 hours.

Applying Ford touch up paint is, in some ways, all about timing. So, allow adequate time for coats, drying, and application of your primer.