Brief Introduction About The Asphalt Hot Mix Plant

Concrete Mixer And Pump Aimix
3 min readJul 10, 2018

--

Known to some as the hot mix asphalt plant for sale, the key operation of your asphalt batch mix plant is usually to make HMA, an abbreviation for hot mix asphalt (I suppose you now see where the initial name is derived). Asphalt is necessary for the construction of roads and related surfaces. But have you ever wondered where it comes down from or the way it is made?

Aggregates and bitumen are blended together inside of the plant to produce the recent mix substance that may be asphalt. This article, however, enters into a little bit more detail, offering some brief insight into the way the plant works.

asphalt hot mix plant

Components of Asphalt Hot Mix Plant

Before we get into the whole process however, you should note the constituents in the mix plant, which include: cold feed bins; primary vibrating screen; charging conveyor; drying drums plus burner; bucket elevator; pre-separator with bag filter; vibrating screens; hot bins; mixing unit; bitumen tanks; weighing bins; storage silo; control panel.

Initially, raw aggregates are fed into what are called feeder bins. Each bin comes provided with a feed gate that control the flow of aggregates. Through the bin, aggregates are conveyed into drying drums which can be fitted with burners that facilitate the drying of aggregates. Through the heating drums, aggregates are relocated to the tower unit by way of a bucket elevator.

hot mix asphalt plant for sale

On the towers top, screening transpires, which can be done via layers of screen that separate the aggregate into different bins according to their sizes. The aggregates then their very own weight taken and after that they may be deposited into a mixing unit with filler components and bitumen. Where does the bitumen are derived from you wonder? From the bitumen tanks that heat and store it up. They include pumping mechanisms that pump the bitumen to your weighing station where it weighed before discharge in the mixer. Filler components are then added in a separate unit, pumped to where also, they are weighed then put into the mixer.

Mixing normally happens for any prescribed period after which the asphalt is deposited into waiting transportation or into silos for temporary storage. The mixers are generally thoroughly insulated to guarantee the contents retain their heat.

hot mix bitumen plant for sale

Hot mix plant are constructed to get as environmental friendly as you possibly can. This is accomplished via bag filter and pre-separator units. The pre-separator units are important for your containment of heavy dust. The bag filter alternatively contains bags within close proximity of every other in just a chamber that is certainly closed. As gas gets sucked from your heating drums, and is also passed from the chamber, the majority of the pollutants will get trapped within the bags thus with an extent, filtering the atmosphere of most polluting agents. Welcome to contact us, concrete-batching-plant.net/.

Each of the operations in the plant are controlled by an operator through the cpanel. A lot of the operations are autonomous, but human intervention may still be required once in a while. The machine is extremely advanced, which suggests only qualified personel can interpret and employ it. Every one of the operations can be found inside a lay out that is certainly simple to interpret.

--

--