Selection & Installation of Jeep Dash Kits — Steps for Making the Process Simple
Are you wanting to give your Jeep a new look? Have you been enticed by the pictures of perfectly installed jeep dash kits? Maybe you’re unsure of your ability to install them as you are not used to carrying out your own custom work? Don’t worry, you can have faith in yourself and be confident as installing a dash kit isn’t rocket science! It is a simple task if you observe a couple of key points carefully and follow them exactly. Let us take a look at those key points below:
Thorough Cleaning is the Key:
Cleaning the interior surfaces of your Jeep destined for beautification thoroughly, is the first step. You need to do it thoroughly or else the Jeep dash kit panels may start to detach at some point in the future. Isopropyl Rubbing Alcohol is best for cleaning interior surfaces. Use plenty of it as it will not harm the dashboard in any way. Make sure that the base surface is free from dirt, grease and fingerprints. This is especially important if your Jeep has had Armor-All or any other interior surface dressing applied. Any trace of this MUST be removed thoroughly.
Plan and Practice Well Before Actual Installation:
Before installing your Jeep dash kit, make sure the surface is completely and properly cleaned. Before beginning to peel off the protective liner from the adhesive, you should dry fit all the pieces first. Hold the pieces in place to ensure that they fit well and all the buttons can move freely. Dry fitting process helps you in figuring out the points that you should use as reference points when carrying out the actual installation. Practice-fitting is the best way to know exactly how to apply the pieces and to get them in the right place on the first attempt. Planning and practicing dry fitting makes the work flow smooth and precise. Some of the critical areas that you need to pay special attention to include the corners, narrow strips of trim, around air vents, around the edges of areas where flexing of the dash kit component is required to make it fit perfectly. Use the included adhesive promoter on areas that require flexing and bending of the pieces.
Begin with Easy Fittings Pieces First:
Begin with small and flat pieces that are easy to fit and do not require promoter to stay in place. It will help to get the right feel for the material and help you fit the components with required precision in the easiest way possible. You may initially find applying promoter as a difficult task but it is actually an easy process if you have made a proper plan and protected the surrounding areas carefully and thoroughly. After a few minutes of applying the promoter, it is time for you to put the components of the Jeep dash kit in place. Peel the backing off and apply each piece to its place exactly where you practiced the dry fitting.
Once the installation is done, wipe everything down using a soft cloth. And it is done! Just lean back, enjoy and take pride in your newly installed Jeep dash kit! You have just transformed your Jeep into something even more exciting and appealing than ever before! Just remember one thing — Never rush to install the dash kit! Take your time and get it done right!
Conclusion:
Checkout our wide collection of Jeep dash kits at https://www.dashkitspecialties.com/dash-kits-jeep.html that include real wood grain, synthetic wood grain, fun colors, bright chrome, brushed aluminum and carbon fiber dash kits for many Jeep models including Wrangler, Cherokee, Commander, Compass, Patriot and Liberty.