Facts About Floor Refinishing
When you have hardwood floors, there will come a time when you have to get them refinished. Floors are refinished to help improve their look and clean them up. Unlike carpets or other types of flooring, hardwood floors are intended to last a long time. Most of the time, they will be able to be refinished instead of replaced. However, getting floor refinishing in Minneapolis involves many different elements. It is helpful if you understand some facts about the process before you hire someone to refinish your wood floors.
Choosing when to do your floor refinishing in Minneapolis should be done carefully. If it is very rainy or humid, then it probably isn’t a good time to do the project. The materials used won’t set up properly and drying time could be extended under these conditions. In addition, because wood is porous, the act of stripping the old finishes off could cause damage or issues with moisture absorption during the process.
You also should avoid other construction work while refinishing the floors. This is because dust and debris during the construction process can easily get into the finish before it dries. In addition, because the floors cannot be walked on during the process, it can be difficult for other workers to get to the different areas of your home.
Lastly, when you plan the time to do the job, be aware that it can take about three to five days from start to finish. However, it could take longer depending on the type of wood, the size of the floor, the extent of damage that needs fixed and any other specifications that you may have given your contractor.
You also have to keep safety in mind throughout the process of refinishing. Dust control will be a huge issue because floor sanding in Minneapolis produced a lot of dust. Your contractor will seal off the room and do everything possible to limit dust getting to other areas of your home, but this cannot provide complete protection. In addition, the coating applied to the floor will let off fumes that could trigger allergy issues or be a problem for those with breathing problems. If at all possible, you might consider leaving for the time it will take to complete the refinishing process.
Finally, when it comes to refinishing a hardwood floor, you have to control your expectations. Be aware that not all hardwood can even be refinished. If you have wood that is too thin or has been refinished too many times, it may have to be replaced instead. In addition, serious damage cannot really be refinished; it must be repaired. While refinishing can bring new life to your floors, you should be aware that it won’t make them look brand new. If there are deep gouges or stains, they may be able to be lightened, but most often they won’t be completely removed. Just know that refinishing is designed to help brighten floors and remove minor flaws.
When you are looking at floor refinishing in Minneapolis, make sure that you are aware of what the process really involves. You should always discuss the process with your contractor, too, just so you are aware of what will happen in your specific situation.