How to Connect Canon ip110 Printer to the Phone?

Canon Pixma IP110 is a compact multifunction printer that allows users to connect to a computer wirelessly. Therefore, to take advantage of its incredible print quality, the first thing you need to set up your printer correctly. Therefore, it is necessary to understand the Canon IP110 configuration process.

The easiest way to configure your canon ip110 setup wireless network is to use the WPS connection method. There are several conditions to consider before using configuration measures. These are:

  • The router must have a WPS button.
  • The network must nee to follow the WAP security protocol.

Then you can do the following:

  • First of all, check if the printer is turned on.
  • Press and hold the Wi-Fi button for a few seconds before the white power indicator flashes.
  • Press the WPS button on the router and wait at least two minutes.

The printer will now start searching for an available network and you will see that the blue Wi-Fi indicator is flashing. When the printer successfully connects to the sender community, the blue and white indicator will stop blinking and remain lit.

Network Setting Configuration:

You must now confirm that the printer has been successfully connected to the broadcast network. To check this, you can print the printer’s system settings (if you want). Here are the steps you can take to achieve this:

Press the “Resume / Cancel” button and then hold it until the white power indicator blinks 6 times.

Then you will understand that the network information page will be printed. Now confirm that “Link” suggests “Active” and also the SSID service set ID shows the correct sender community name. Now you need to install the Canon IP110 printer driver and application. If you do not have the installation CD that came with the printer, you can download it from the official Canon website.

How do I install the driver and software using CD-ROM?

To perform this installation procedure, you can go through the steps mention below:

Step 1

First, insert the CD-ROM into your computer’s CD-ROM drive and run the installation. Double-click “MSETUP4.EXE”.

Step 2

When the first start screen is displayed, tap Next. Then select “Wireless LAN connection” as the connection method and click Next.

Step 3

Then make sure the printer is on and the power-on indicator is on. Click Next. The software will now search for an available network. Make sure that the “Printer settings cannot be found in the list” option is selected and press Next.

Step 4

Now initiates the installation process of the Installation Guide. Click the following button to continue.

When the “Connect through Cable Free Configuration” screen appears, press and hold the Wi-Fi button of the printer until the white power indicator blinks 2 times. Click Next.

Step 5

Then confirm that the blue Wi-Fi indicator is flashing quickly and the white power indicator is on.

Now configuration. The network link is temporarily disabled during installation. Please wait patiently. When the printer connects the entry point, touch the following button.

Step 6

When the “Choose home location” screen appears, select your status and click Next to proceed. Then select a region from the list of areas. Click Next.

Step 7

After opening the “Software Installation List” screen, select the software you want to install and press Next to continue.

If you’re not sure which software you want to install, don’t worry about it. You can uninstall it at any time.

Step 8

Then click the following button on the “Allow all installation wizard procedures” screen.

Step 9

The software is now configured correctly. If the “Check Printer Settings” screen appears during the installation procedure, click the Detect button again. The printer search will start. This may take several minutes depending on the network configuration.

Step 10

When the “Wireless Configuration” screen is complete, check the model name and SSID of the wireless community and tap Finish. Then the “Recommended printhead position” screen will open. Click Next.

Step 11

You will now be able to register the printer. If you want to register it, click Next. Otherwise, click Cancel.

To take part in the extended survey, touch the I agree on the button. If not, click “Disagree.”

Step 12

If the “Rating Print” screen appears and if you want to take a Canon IP110 printer test printer, touch the Go button. Otherwise, click Next.

When the “Installation successful” message appears on the screen, touch the Exit button to complete the installation procedure.

That’s all. These are all general measures for the Canon IP110 configuration.

I am working as a Customer Service Manager playing a role between a client and the company. The first point of contact with a client who has a any query.

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store