Guide to Replacement of Door Knobs

Designed4Doors
3 min readNov 7, 2017

--

Brass Door Knobs

Door knob holds an important part of your home and office. Whenever these door knobs get damaged, it is essential to immediately replace them such that adequate privacy and security can be maintained at a place. The knobs installed at various parts of locations are used throughout the day. This causes them to wear and tear easily, and this is when the need of immediate replacement arises. In order to make sure that replacement is carried out wisely, it is advisable to keep in mind some of the vital factors in mind.

Replacement is not a Difficult Job

The door knobs UK is one of the simplest operating structure which is placed almost everywhere and can be installed without any problem. However to achieve hundred percent success it is essential to carry out the task with full concentration. Apart from that, one should also keep an eye on the type of door knobs chosen. The choice of door knobs will be different for different locations, like on the exteriors rough and tough door knobs should be chosen, however if you are looking something for the interiors delicate and soft door knobs would also do.

How to remove the door knobs?

If you have to remove exterior door knobs some crucial parts have to be pulled out like screws and locks. door Knobs located on the exterior are often exposed to unwanted handling. This often compels the owner to add locking system and rough door knobs to the door. Apart from that, deadbolts are used with levers to make the place safe. Along with it, people also choose to install brass door handles such that door is properly equipped to handle the security of place.On the other hand if we discuss about interior door knobs, they are much simpler in comparison to the exterior parts. They have a basic structure and are installed in the simplest way possible. To begin with the uninstallation of door knobs following steps should be followed;

1. Remove the main screw using a screwdriver.

2. After that door knobs placed on each direction will come out.

3. Now faceplate screws placed on the edges have to be taken out such that latching parts can be removed.

4. Now remove the main plate by removing the anchor screws placed within the door knobs.

Above mentioned are some of the basic steps following which door knobs can be easily removed.

Replacement/Installation of new door knobs

It is important to carry out installation of door knobs or brass cupboard knobs carefully. Following steps can be followed to achieve success in the process;

1. The very basic step of replacement is to match the new door knobs with the already existing door design. If this step has been carried out successfully, it is time for you to begin with the removal process.

2. Place the latch mechanism on the door.

3. Make sure to keep the screws loose such that door knobs get adjusted smoothly.

4. Once the process has been carried out successfully it is time to tighten the screw and adjust the adjoining parts appropriately.

By carrying out steps mentioned above you are done with the replacement of door knobs successfully.

--

--

Designed4Doors
0 Followers

Designed4Doors is the online architectural ironmongery website of Till and Whitehead Ltd. https://www.designed4doors.uk/