There are some users reported that the iPhone volume kept going down or up on its own. In fact, there several reasons why this this issue happened, including hardware damage, iOS glitches, iPhone case pressure, etc. However, we can fix iPhone volume keeps going down or up by ourselves at home first. In this post, we will show you 8 ways to fix it.
Fix 1: Remove the iPhone Case
First, check if your iPhone case causes pressure on the volume buttons. If yes, remove or change iPhone case.
Fix 2: Turn off Change with Buttons
Go to Settings, find the Sounds/Sounds & Haptics, and click it. Tap the toggle button Change with Buttons to turn it grey.
Fix 3: Turn off Bluetooth
Check if your iPhone is connected to some special Bluetooth device. You can try to turn off the Bluetooth to see if it works.
Fix 4: Switch off Attention Aware Features
Open Settings, click Face ID & Passcode button. Find the button Attention Aware Features and turn it off.
Fix 5: Restart Your iPhone
Restarting your iPhone is a common way to system or software glitches. It is concluded that performing a restart can be a good choice.
Fix 6: Reset All Settings
If restarting iPhone does not work, you can try to reset your iPhone. But this method means resetting your iPhone to factory settings. Before adopting this way, do not forget to back up your data. Go to Settings, click General, click transfer or reset iPhone, click Erase all content settings button, click continue, and enter the passwords to confirm this action.
Fix 7: Use a Third-party Repair Tool
When the above-mentioned methods fail to fix iPhone volume keeps going down or up randomly, you can try a professional iOS system recovery tool. Here we recommend Joyoshare UltFix. After using this repair tool, you can fix iPhone volume keeps going down or up easily without data loss. In addition, it can also fix iPhone stuck in Apple logo, restore screen, frozen screen, etc, more than 150 iOS issues. Now let me show you how to using Joyoshare VidiKit to fix iPhone volume keeps going down or up issue.
Connect iPhone with a computer by an Apple cable, and put your iPhone in the recovery mode, press the “Start” button to proceed;
Now you are in the mode selection window, to get out of iPhone volume goes up by itself or goes down by itself, click on the “Standard Mode” box. Then click on the “Next” button.
Check the device info and download the firmware package by pressing on the “Download” button. After that, Joyoshare UltFix will start to verify the firmware package.
Lastly, Tap on the “Repair” button at the right bottom to unzip the downloaded firmware package and fix the iOS.
Fix 8: Visit Apple Support
If you still can not fix this issue by using all the ways above, it is the hardware issue, you can reach out to the Apple support to fix it.
That’s all, hope this article will help you, see you next time!