Cell Phone Repair In Vancouver Guide to Repairing a Phone’s Back Glass

Cell phones are extremely fragile and sensitive devices. Some can even crack with a slight jerk, so take additional steps to avoid regretting purchasing this item. Cracked screens, battery troubles, rear glass breaking, touch issues, and other common cell phone issues are faced on a regular basis.

If you need cell phone repair in Vancouver, Fix For You Cellular is your best bet. Bring your damaged equipment to us, and our professionals will repair it using various approaches. A professional is advised since they can address the problem quickly and at a low cost. If you attempt to fix it yourself, you will wind up with more damaged equipment that an expert will be unable to restore.

How to Repair a Cell Phone Back Glass in Vancouver

The repair techniques for all iPhones are nearly comparable, but differ significantly from model to model. If you are repairing the rear glass of your phone manually, make sure the battery is less than 25% discharged before removing the device parts. Because the smaller the battery, the lower the fire danger if it is mistakenly damaged during the repair.

If your phone’s battery is bloated or previously damaged, bring it to us and we will safely replace the rear glass. Another disadvantage of doing rear glass repair at home is that you will require a replacement glue to connect the screen when reassembling the device, resulting in a reduced ingress protection (IP) rating.

Opening Picks (Set of 6), Suction Handle, Tri-point Y000 Screwdriver, P2 Pentalobe Screwdriver iPhone, Spudger, and Tweezers are required equipment for iPhone repair in Vancouver. Packing tape, safety glasses, and a heat gun are all optional items. The steps for replacing the rear glass of the iPhone 14 international technique are as follows:

Pentalobe screws must be removed.

Pentalobe screws are positioned on the side of the speaker at the bottom of the phone. Remove them with a special P2P Pentalobe screwdriver.

The phone is being warmed up.

After removing the screws, use an iOpener to heat the lower edge of the iPhone. The glue is softened by heating. After it has softened, slice and divide it with the opening kit’s other tools.

This kit is specifically developed for the iPad, but it also works with tablets, androids, iPhones, and other digital devices that require a heating treatment during disassembly. The kit is microwaveable, reusable, non-toxic, and food safe.

Opening selection

To open the bottom glue-laden sections, an opening pick is put in the lower area.

Separating the glass adhesive’s left side

Heat the glue on the rear glass’s left side to separate it.

Slicing method

Slice the left edge of the occasional glass after detaching the adhesive.

Separating and slicing the glass adhesive’s right side

After separating and slicing the left side of the unique glass adhesive, it’s time to move on to the right side. With the aid of an iOpener, heat the right side and then slice it with the opening pick.

Slicing and separating the top side

Now that the top of the rear glass has been heated and sliced, the back of the iPhone is ready to be separated.

Unscrewing the screws

To release the battery cover, unfasten the battery connection cover screws. Then, elevate the battery’s surface, and last, detach the battery.

Remove the charging coil connection.

Remove the screws holding the charging coil connector cover, then remove the cover and disconnect the charging coil.

The final step

It’s time to replace the broken rear assembly with the new one. Attach all of the different sections, then apply the glue and the farther back. These procedures are highly delicate and need a high level of experience. If you are unskilled, it is essential that you call a professional at Fix For You Cellular for smartphone repair in Vancouver.

Conclusion

Along with phone repair, we also provide affordable Mac repair in Vancouver. As a result, you can seek our assistance with your concerns.