How to setup Raspberry Pi Zero W headless Wifi — MoboXtreme

The version of Raspberry Pi Zero:
If there is No camera then you have Early Pi Zero
If there is a Camera and Pi Logo in Front then you have the Second version of Pi Zero.
Latest Pi Zero W contains Wifi and Bluetooth facility and logo will be on the backside.
What is HeadLess Raspberry Pi?
A computer setup without a monitor is said to be running headless. You might want to do this if you’re installing your Pi into some project, or want to keep power-usage and cost minimal. This kind of setup is what the Pi Zero W was built for. The idea is that you can still access your Pi’s terminal interface over your network using a protocol called SSH.
All we need to do is get our Pi set up with the right WiFi credentials and we’ll be able to remotely access it through a terminal program as if we were using the terminal Pi’s own desktop.
You will need:
Raspberry Pi with Wifi onboard, here I am using Zero W
A micro SD card with SD Card Reader.
USB Cable for power supply
A computer which must be connected to the same network where Pi is connected.
Raspbian Stretch
Putty / MoboXtreme, here I am using MoboXtreme for lightweight display of Raspberry Pi.
Procedure:
Download Raspbian Stretch

Boot OS in 8gb Memory Card using Etcher (Suggested by Raspberry pi Site)

Open SD Card Drive
Find Config.txt:
Add dtoverlay=dwc2 (after the last line) & SAVE
Find cmdline.txt:
Add modules-load=dwc2,g_ether (after rootwait)

Insert Memory Card in Raspberry Pi and power it through USB
Power Port is at the corner

5. Install MoboXtreme

Open local wifi admin portal
Find LAN Client List
Search IP Address of raspberry pi

Open MoboXtreme
Session->SSH
Remote Host: pi@
Port: 22
Click OK

Enter Login
User: pi
Password: raspberry (default password)
For GUI mode
$startlxde

