Windows 10 install doesn’t see hard drive

6 min readOct 18, 2022

Fixed: Windows 10 Does Not Recognize External Hard Drive — TenComputer.

In this video, we’re going to show you what to Fix Windows 10 doesn’t recognize second Hard Drive. We can solve the problem by running the troubleshooter for Hardware and Devices, or by updating. Microsoft.

Fix UEFI Boot: Fix for Windows 10, Windows 11, 7, and 8.

Follow these steps to run diskpart to repair the boot sector code of the Windows 7 installation: Follow the steps from Fix #1: Use bootrec until you reach Command Prompt. Type: bootsect /nt60 SYS /mbr. Press Enter. Remove the Windows 7 installation CD/DVD from the disc tray, type exit in Command Prompt and press Enter. Win10 Installation: “We couldn’t find any drives. To get a storage driver, click Load driver.” We also could refer the link below for some general steps: Effective Fixes for Hard Drive Not Detected in Windows 10 Installation. Also I would like recommend to change with another Windows 10 installation image if the issue persists after upper steps.

2022 Fix: Windows 10, 11 doesn’t recognize second Hard Drive.

Go to see my attachment slelct computer management, in the left hand pane select disk management…. in the right hand side, select the disk you wan to format, right hand click on it and select quick format hope this helps My Computer Barman58 Posts 28,675 Windows 10 Pro x64 [Latest Release Preview] 27 Jan 2010 #6.

Windows 10 install issues — and what to do about them.

Open it and find the Disk drives section. Expand Disk Drives, locate your hard drive, right-click it and select Properties from the menu. Inside the Properties panel, select the Driver tab and click on the Enable Device button. Click OK, and your hard drive should become visible.

How to Fix a DVD or CD Drive Not Working or Missing in Windows 10.

Windows 10 doesn’t see some Hard Drives — Ten Forums.

Live CD Doesn’t see Hard Drive. I’m trying to install 18.04 as a dual boot with Windows 10. I’ve been able to shrink the Windows partition using it’s Disk Management tool and have 80 gigs of unallocated space for Ubuntu. I’ve also created a bootable USB stick but when I run the installer, the stick is the only drive that shows up.

How to make Windows 10 recognise an external hard drive.

Solved: I want to clean install windows to remove all the bloatware. I’ve created a USB installation drive, boot from it and go to do a custom. Boot from Windows 10 installation USB key. when you arrive at “install” winodws , pres shift+F10 to open a CMD promtp then type DiSKPART lis dis (it must shows two disks: the internal NMVE SSD as disk 0 and the USB Key as Disk 1) if you see two disk as I wrote above, then sel dis 0 clean exit then continue with Windows 10 installation. E.g. Windows key + X, click Disk Management. To post a screenshot please use the insert image icon to the left of the video icon above your post. Check your missing disk has a drive letter allocated. If not, try assigning one. My Computers.

Windows 10 Installation Process Doesn’t Recognise.

5. Fix corrupted registry entries. 6. Create a registry subkey. 7. Backup your system in case DVD drive missing again. 1. Make sure your DVD drive is correctly connected. Before you do anything else, check again that your DVD drive is properly connected to the computer. STEP 1: Press WIN+R keys together to launch RUN dialog box. Now type in RUN dialog box and press Enter key. It’ll open Disk Management program window. STEP 2: Now you’ll see your existing partitions/drives along with some extra partitions in this program. Actually when you create new partitions at the time of Windows. Check your settings and make sure the drives are GPT. The older MBR drive type has a hard limit of 2TB — no way around it. Are you sure about the RAID10 limit? Or was that a requirement of yours, not the controller? You should be able to do a RAID 10 with 4 drives and up. Spice (1) flag Report Was this post helpful? thumb_up thumb_down lock.

Cant install windows. Not detecting hard drives — HP Support.

Typically, on a desktop, these are on the front or back of the case. On a laptop, they’re usually on the sides. In the Windows 10 search bar, type This PC. Click This PC. Double-click the external hard drive listed. It’s usually listed next to the C drive in Windows. Access any files on the hard drive like you would with an ordinary internal.

HP PCs — No drives can be found during Windows 11 or Windows.

Connect the Drive Internally. If you have a desktop computer, the most straightforward way to access files on an old hard drive with your new Windows 10 computer is to install it as an additional drive. You don’t need to do this permanently, just slide off the side panel of your desktop machine and connect it using any free power and data.

Windows does not detect HDD during install — Windows 10 Support.

In the run box, enter and tap the Enter key. Right-click the hard drive (not the storage area bar but the drive name). From the context menu, select Initialize Disk (this will not result in data loss). Complete the process and open File Explorer to view the contents of the disk. 3. Fix unallocated space. HP PCs — No drives can be found during Windows 11 or Windows 10 installation (Intel 11th Generation processors) Follow these steps to create installation media, locate and install the missing storage drivers, and complete the Windows 11 or Windows 10 installation. Right-click This Computer and choose Manage to enter into Computer Management. Select Disk Management to check the condition of the WD external hard drive. Commonly, when the unrecognized WD external hard can be found in Disk Management, it shows up as: 1. The WD external hard drive is not initialized.

Drives not visible on server while installing Windows Server 2016.

. Windows 10 can’t see the drive. Since your running DOS this is unlikely happening. 2. The existing HDD or SATA SSD is formatted as MBR but you are booting to the USB using UEFI GPT or vice versa. Windows installer may not see the drive. Either start with a wiped HDD or format the drive using GPT.

Fix: New Hard Drive not showing up in Disk Management.

No options are listed and at the bottom of the screen it says ‘No drives were found. Click Load Driver to provide mass storage driver for installation’. Pressing F6 or clicking the load driver option does the same thing but i’ve clicked both at different times. I browse and point to Multiboot (E:) and click ok.

[Fix] Hard Disk Drives (Partitions) Not Visible in Computer.

Windows 10 won’t recognize my hard drive after installation. I just built a desktop and used one SSD and one HDD. When I installed windows (to the SSD) it recognized both drives, but afterwards it wouldn’t show the HDD in “my pc”, or acknowledge an E: drive. I do have an ODD, so that is the D: drive. I tried replacing SATA cables, but no result. Type BOOTREC /FIXMBR and hit <Enter>. This command will attempt to fix any corruption issues with the master boot record. If all goes well, you should see The operation completed successfully. But if you don’t see it, try pressing one f the F keys (F2, F4, F8, F10, F12) or the Del key (for Dell computers). Press the BIOS key during the startup procedure. Note: You can also search online for your specific BIOS Key. Once you get inside the BIOS settings, go to the Boot tab (or Boot Device Priority) and see if your new HDD shows up.