Brother Printer Not Connecting To WiFi | Fix It Now

Brother Printer Not Connecting To WiFi +1–888–966–6097

Introduction:

A Brother printer is a popular choice for home and office use due to its reliability and performance. However, like any other electronic device, it may encounter connectivity issues, particularly when connecting to Wi-Fi. If you are facing difficulties in connecting your Brother printer to Wi-Fi, this guide will walk you through troubleshooting steps to resolve the problem. By following these steps, you can get your Brother printer connected to Wi-Fi in no time.

Step 1: Verify Wi-Fi Network:

The first step is to ensure that your Wi-Fi network is working correctly. Check if other devices can connect to the network without any issues. Restart your Wi-Fi router and modem to eliminate any temporary glitches. Ensure that your printer is within the range of your Wi-Fi network and that there are no physical obstructions causing signal interference.

Step 2: Restart Printer:

Next, power off your Brother printer and unplug it from the power source. Wait for about 30 seconds, then plug it back in and turn it on. This will perform a complete reboot of the printer, allowing it to refresh its network settings.

Step 3: Verify Printer Settings:

Access your Brother printer’s settings menu by using the control panel or the printer’s web interface. Check if the printer is set to connect via Wi-Fi and verify that the Wi-Fi indicator light is turned on. If not, navigate to the network settings and select the Wi-Fi connection option.

Step 4: Re-enter Wi-Fi Network Credentials:

Sometimes, incorrect Wi-Fi network credentials can prevent the printer from connecting. On your printer’s control panel or web interface, locate the Wi-Fi settings menu and choose the option to enter network credentials manually. Carefully enter the correct SSID (network name) and password for your Wi-Fi network.

Step 5: Reset Network Settings:

If the previous steps haven’t resolved the issue, you can try resetting the network settings on your Brother printer. On the printer’s control panel or web interface, navigate to the network settings menu and choose the option to reset network settings. Confirm the reset and wait for the printer to restart. After the reset, reconfigure the Wi-Fi settings and try connecting again.

Step 6: Disable Firewall or Antivirus:

In some cases, firewall or antivirus settings on your computer can interfere with the printer’s network connection. Temporarily disable any firewall or antivirus software installed on your computer and attempt to connect the printer to Wi-Fi again. If the connection is successful, adjust the settings of your firewall or antivirus software to allow the printer’s network traffic.

Step 7: Update Printer Firmware:

Outdated printer firmware can sometimes cause connectivity issues. Visit Brother’s official website and search for your printer model. Look for firmware updates and download the latest version available. Follow the instructions provided by Brother to update the printer firmware. Once the update is complete, attempt to connect the printer to Wi-Fi again.