Spin Retry Count | Tom’s Hardware Forum.
Just noticed my external HDD shows up having a Calibration Retry Count error, and the Data value is 5. According to Crystaldisk, it also reads 5 under Data, but Recalibration Retries is blue instead of yellow (meaning it’s normal) and my health status is Good. I have no idea what this means, only that potentially it could be a problem. I have bought a new Lenovo laptop 1 month ago and after 3 days I installed hard disk sentinal to check my hard drive status. At first I noticed that one smart attribute “spin retry count” as value of 113,but now after 3 weeks later Its value goes to 201. And i face some issue with hard drive, it is slower than usual.
ZAR — Quick guide to understanding S.M.A.R.T. information.
Messages. 805 (1.30/day) Apr 24, 2022. #1. I have a Toshiba HDD that reports 65,536 (000000010000h) for its spin retry count yet in speedfan the value is marked OK. All my other HDD’s report a zero value for this metric. 1. Is spin retry count represent an aggregate value (i.e. of all spin retries for the life of the HDD) or a worst case event. Spin retrys are only ever that. It could be stiction. It could be a weak power supply that cant deliver the startup current. If you have a decent multimeter, you could see what happens to the 12V rail during spinup. If it is a power supply problem, you should be able to see the 12V sag during the spinup. But if it sags, it could be stiction.
Smart — Interpreting the Spin Retry Count S.M.A.R.T.
Attribute ID: 10. Description: Count of retry of spin start attempts. This attribute stores a total count of the spin start attempts to reach the fully operational speed (under the condition that the first attempt was unsuccessful). A decrease of this attribute value is a sign of problems in the hard disk mechanical subsystem. Spin Retry Count: Lower: Count of retry of spin start attempts. This attribute stores a total count of the spin start attempts to reach the fully operational speed under the condition that the first attempt was unsuccessful). An increase of this attribute value is a sign of problems in the hard disk mechanical subsystem. 11: 0B: Recalibration.
I think I’ve solved my Spin Retry Count problem — Google Groups.
This parameter usually indicates the count of retry of spin start attempts. This attribute stores a total count of the spin start attempts to reach the fully operational speed (under the condition. Question about “spin retry count”. Hi everyone here. I just bought a brand new macbook pro 13" mid 2012 for 2 week ago. I’m a new mac user. From the day i had the macbook i’m already used the tech tool pro 6 for diagnosis the mac. Every thing run pretty normal with normal result outcome. Spin Retry Count S.M.A.R.T. parameter indicates the count of retry of spin start attempts. This attribute stores a total count of the spin start attempts to reach the fully operational speed (under the condition that the first attempt was unsuccessful). Spin attempts are counted for the entire hard drive’s lifetime so far.
How to fix spin retry error on Seagate HDD — Tom’s Hardware Forum.
Get a software to check your hard drive, hard disk sentinel, or similar, but this is not good sign, means something wrong is happening with your hdd, try to run hdd check, from the bios and also from windows, (basically that last two steps make no sens, but hp service will require that before exchange your hard drive for a new one, you can send. Very load buzzing noise and the Seagate has that large value of “Spin Retry Count” — — -failure of the motor that spins the drive. if it works at all right now backup your important data. most.
HDD Spin retry count: non-zero values | TechPowerUp Forums.
Hi, Just got the report appended from smartctl 5.37: smartmontools has suggested panicking due to attribute 10, Spin_Retry_count failing, on one of my disks… However the line is: 10 Spin_Retry_Count 0x0013 077 077 097 Pre-fail Always FAILING_NOW 0 I’m confused as the raw value is zero. Count of retry of spin start attempts. This attribute stores a total count of the spin start attempts to reach the fully operational speed (under the condition that the first attempt was unsuccessful). An increase of this attribute value is a sign of problems in the hard disk mechanical subsystem. 11 0x0B: Recalibration Retries or Calibration. Maximum values are typically 100, 200 or 253. Rule of thumb is: high values are good, low values are bad. “ Threshold “ — the minimum normalized value limit for the attribute. If the normalized value falls below the threshold, the disk is considered defective and should be replaced under warranty.
Calibration Retry Count error on HDD? — Linus Tech Tips.
Spin Retry Count — Current 100, Worst 100, Threshold 97, Data 1 4.5ghz — 3570K 4.5ghz — 4930K Kramy Premium Member Joined May 27, 2005 9,525 Posts #5 · Jun 23, 2012 Data — 1 It failed to spinup to the rated speed once… probably nothing to worry about. This is a S.M.A.R.T. hard drive performance counter. This counter tracks how many times the drive motor was stopped and started in attempts to get the drive motor up to an acceptable speed. To explain: Inside the drive there is a small electric motor that is responsible for spinning the hard disk spindle. I have just run Drive Monitor for the first time and got a “Critical” warning for Spin Retry Count with the following details Raw Value 16 Value 100 Threshold 97 My disk is a Seagate 3500320AS 500GB SATA and I ran the Seagate Tools Diagnostics selecting S.M.A.R.T and both short and Long Self Tests which all came up as OK! Where do I go from here?.
What causes hard drives to have high “spin retry count”?.
Linus Media Group is not associated with these services. Sign Up; Forums Community Standards All Activity My Activity Streams. What exactly is spin retry count. Reply. thetoxicmind. ex-Mod. May 21, 2008 #2 stackoverflow said: Hello, I ran HDTune health for my new seagate 500 GB. The spin retry count is shown as Current Worst Threshhold Data 100 100 97 0 this row is marked in yellow Is there any reason to worry.
Spin Retry Count? — Storage Devices — Linus Tech Tips.
So usually the value of 100 means that everything is OK.Higher values often mean that the attribute has never been updated (implies 100). As your Current value is 166, this only means that you never had aSpin Retry Count error, which agrees with your Raw value of 0.You should consider replacing the disk if Current ever drops below 30. Jun 20, 2021 Spin Retry Count: Count of retry of spin start attempts. This attribute stores a total count of the spin start attempts to reach the fully operational speed under the condition that the first attempt was unsuccessful.
S.M.A.R.T. — Wikipedia.
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology; often written as SMART) is a monitoring system included in computer hard disk drives (HDDs), solid-state drives (SSDs), and eMMC drives. Its primary function is to detect and report various indicators of drive reliability with the intent of anticipating imminent hardware failures.
Spin Retry Count — HDTune | O.
June 17, 2014 in Storage Devices Posted June 17, 2014 Last few days, i had a warning from window that my drive has some error hence i went to do a S.M.A.R.T check and found out that the spin retry count was at 45 rather that above 60, this continue till today i went back to check, it went back up to 90.
Hard drive spin retry count | Tech Support Forum.
>> spin retry count thats much more likely to be a problem external to the drive than internal to the drive. > Well, HD Sentinel uses some kind of proprietary internal rating equation, which seems to be logarithmic (slows down as > it gets closer to zero).
Spin retry count.
So usually the value of 100 means that everything is OK. Higher values often mean that the attribute has never been updated (implies 100). As your Current value is 166, this only means that you never had a Spin Retry Count error, which agrees with your Raw value of 0. You should consider replacing the disk if Current ever drops below 30.
Other content:
