boAt Airdopes 141 Pro User Manual

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 141 Pro. Please consider this manual as your guiding map towards the unparalleled shores of the auditory realm. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend a thorough reading of this manual. Also, you may refer to the same at times when you face any sort of difficulty.

boAt Airdopes 141 Pro User Manual & Quick start guide

boAt Airdopes 141 Pro User Manual

Package Contains

1. Pair of TWS Earbuds
2. Charging Case
3. Type C Charging cable
4. User Manual
5. Warranty card
6. Catalogue
7. Read me card
8. FAQ card

Power On (First-time user)

Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Courtesy of our IWP (Insta wake N Pair) technology, the earbuds power on automatically, get connected and enter the connection mode.

OR

Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds.

Step 2: After powering on, the earbuds enter the connection mode, indicated by alternate red and blue LED flashes on the primary earbud and blue LED flashes once every 5 seconds on the secondary earbud.

Connection Mode

Step 3: Turn on the Bluetooth functionality on your phone/media device/ and scan.

Step 4: Search for ‘Airdopes 141 Pr’ and pair according.

Congratulations! Your earbuds are now connected successfully via Bluetooth.

Note:

Pairing mode lasts for 5 minutes. If the pairing time is missed. then you will need to reconnect the earbuds and follow the above-mentioned procedure.

Airdopes 141 Pro remembers previously connected devices; once switched on, the earbuds automatically reconnect to previously connected devices in working range.

Single Earbud Usage

Step 1: Please note that both the earbuds can be used in mono mode. Use smart/ Manual Power on for switching on the desired earbud.

Step 2: The selected earbud automatically enters the connection mode indicated by red and blue LED flashes.

Step 3: Turn on Bluetooth on your phone/media device and search for ‘Aridopes 141 Pro’ to connect.

Note:

To switch to stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling stereo usage.

You cannot skip tracks or return to the tracks in Mono (single earbud) mode.

Quick Guide on Functionalities

3 seconds: Long touch left CTC for 3 seconds to activate voice assistant.

3 seconds: Long touch right CTC for 3 seconds to activate the beast mode.

3 seconds: Long touch both CTC for 3 seconds to manually power on.

5 seconds: Long touch both CTC for 5 seconds to manually power off.

5 seconds: Long press the reset button for 5 seconds to perform a factory reset.

Charging the Earbuds

Step 1: Please insert the earbuds back inside the charging case in the correct orientation and close the lid.

Step 2: During charging, the LED indicator stays solid area.

Step 3: Once the earbuds get fully charged, the charging case automatically switches off to save power and the LED turns off.

Note:

When the earbuds remaining battery is/ below 20% Red LED blinks 3 times every 30 seconds.

Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging.

Charging the Case

Step: To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/ wall adaptor/ power bank, etc.

During charging, the red LED continuously blinks. Once the case gets fully charged. the LED indicator turns into solid red.

Remaining Low case Battery LED indication

White LED blinks three times to denote a low case battery, whenever the case lid gets opened/ closed.

Case LED indication when Earbuds are getting charged from the case

This is to indicate that the earbuds are getting charged from the case (when the case lid gets closed):

1. While LED turns solid.
2. White LED stays off when earbuds are fully charged.

Basic Functions

1. Voice Assistant: Long touch the left CTC for 3 seconds to activate the default voice assistant.
2. Answer: Single tap the CTC on either earbud to answer an incoming call
3. Hang up/ Reject call: Double tap the CTC on either earbud to end/ reject a call.
4. Play/ Pause Music: Single Tap either earbud’s CTC to play or pause music.
5. Next Track: When playing music, double tap the right earbud’s CTC to skip to the next song.
6. Previous Track: When playing music, double tap the left earbud’s CTC to return to the previous song.

Voice Assistant

Step 1: Long touch the CTC on the left earbud for 3 seconds to activate the default smart voice assistant.

Step 2: The respective voice assistant screen pops up and you may place your commands at ease.

Tips: You may try out the following commands.

Note: If the voice assistant doesn’t get triggered, then the functionalities has to be first enabled via your media device settings.

Beast Mode

Long touch the right CTC for 3 seconds to switch to low latency mode, also known as the BEAST Mode. Once switched on, it gets notified via a sound prompt. Long touch the right CTC for 3 seconds once again. to turn it off and return to Music Mode.

Made for the gamers — By gamers, BEAST Mode reduces the latency significantly and improves the overall gaming experience.

ENx Mode

Our ENx tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx as the mic is equipped with the same and activated by default.

Deliver your voice without interruptions anywhere — traffic, railway stations, airports, workspace; literally anywhere!

Smart Power Off

Step 1: After usage, remove both earbuds from your ears.

Step 2: Place the earbuds back into the charging case in the correct orientation and close the lid.

The earbuds automatically switch off (and enter charging mode).

Manual Power Off

Step 1: Long touch both CTCs for 5 seconds to manually power off the earbuds.

Step 2: Once the earbuds get turned off, place them back inside the case and close the lid.

Factory Reset

Perform the factory reset in case you feel any difficulty while operating your Airdopes.

Note: Before performing reset, clear “Airdopes 141 Pro” from pairing device history by forgetting the device.

Step 1: Place both the earbuds inside the case in the correct orientation and let the case lid remain open.

Step 2: Long press the Reset button on the case for 5 seconds to perform a reset.

Step 3: The case LED flashes 5 times to indicate a successful factory reset.

Step 4: Take out the earbuds from the case and perform a fresh connection.

Congratulations! Your Airdopes 141 Pro has been reset.

Specifications

Headphone Type: TWS

Bluetooth Version: V5.3

Music Playtime: Up to 9 Hrs per charge, Up to 36 Hrs additional with case (at 60% volume)

Standby time: 150 hours

Transmission Range: 10m

Driver Size: 12mm*2

Number of Mics: 4

ENx: Yes

BEAST Mode: Yes

Latency: Low 65ms

Frequency: 20HZ-20KHZ

Battery: 400mAh (Case); 30mAh*2 (Earbuds)

Charging Time: 1 Hour (Earbuds), 1.5 hours (Case)

Charging Interface: USB Type C

Water Resistance: IPX4

Price

The boat airdopes 141 Pro comes under 1500 Rs Budget category TWS.

Warning

1. Please follow the instructions to operate.
2. Please don’t use the earbuds in extreme temperatures
3. Please don’t use the product near water
4. Please keep the product away from heat sources, as the heat may damage it.
5. Don’t jam the port such as the charger port, LED port, etc.
6. It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the earbud's service life.

Source

User Manual: Download Here

Official website: Click Here