What Are The Top Methods To Detect Swimming Pool Leakage Effectively?

The article throws light on the most preferred and effective methods that can help a pool owner to quickly detect leakages in the pool and repair them properly.

There is nothing better exhilarating affair than chilling and relaxing with your closed ones in an exquisitely designed pool in your residence and beating the summer heat. However, certain common issues like cracked tiles, damaged surfaces and leakages crop up over time as your swimming pool ages. It is highly important to carry out a scheduled check-up of your swimming pool to ensure proper identification of damages and swimming pool leakage detection.

If you spare no time to keep your private oasis in optimal condition, then you may end up paying a huge price for that. Aside from evaporation, due to leakages in the swimming pool, water loss at rapid speed and such situations will make you refill the pool multiple times in a day and pay hefty water bills. Hence, you need to be extremely well aware of leakages in your pool and execute the top two hassle-free and effective methods for pool leaks detection or else hire expert pool leakage detection service providers, who can come to your rescue and resolve the issues efficiently.

Top Swimming Pool Leak Detection Methods

Pool leakages can crop up anywhere, be it in the swimming pool vessel, drains, plumbing lines, skimmers, lights, fittings or equalizer lines. Minor leaks are tough to detect and therefore, it is very important to carry out the top two methods — Bucket Test method and Dye Test method to ensure effective swimming pool leak detection if you notice the level of water in the swimming pool is falling down gradually.

Bucket Test Method

• To check and make sure that your pool is losing water due to leakages, it is imperative to carry out the bucket test method.
• Take a bucket and fill it partially with water.
• Make it sit on the steps of the swimming pool.
• Continue pouring water in the bucket and fill it until the water level inside the bucket and the pool is the same.
• Mark the level of water with duct tape or waterproof marker.
• After 24 hours, examine the water level carefully, if you find the water level in the pool and the bucket go down to the same level, then it indicates that water loss is taking place due to evaporation.
• However, after 24 hours, if you notice the water level in the pool is significantly lower than the water level in the bucket, then be sure that water loss is occurring due to leakages in the pool.

Dye Test Method

This is an effective method of swimming pool leak detection if it is carried out in a proper way. It needs you to release the dye in the proximity of the suspected areas and examine whether the dye gets pulled out immediately or not to become sure of the presence of leaks.

• Make sure to turn off the circulation system of the swimming pool and avoid causing any movement in the pool water.
• Ensure the pool water is as still as it can be during conducting the dye test method, even a slight movement of your body can become an obstacle to the test, as the dye would then get mixed and spread wildly in the pool water, which will become impossible for you to evaluate the result and detect the precise leaks.
• Release the stream of dye getting as close to the suspected area as possible.
• Observe and monitor the movement of the stream of dye in the water carefully, if the dye gets pulled out of the swimming pool through the suspected area, then it indicates the presence of leaks or cracks.

Conclusion

Detecting swimming pool leaks is not an easy task, as there could be several minor leaks or cracks in different areas of the pool, however, the above-mentioned two methods are the most effective ones which one can carry out in a seamless way to become sure about the presence of leaks and the main reason of water loss. To conduct such methods effectively, one needs to be very attentive and cautious or else it is better to get in touch with a reliable swimming pool leakage detection service provider to detect and fix the leakages quick and fast.