PF Impact Crusher Maintenance

business

( 1 ) , PF Impact Crusher for sale during operation should always be a routine check , when found to have abnormal sound or bearing temperature is above 70 ℃, should immediately stop inspection and remove faults before they can continue boot .
( 2 ) , the PF impact crusher is operating normally before feeding, feed should be uniform and should prevent mixing iron hard object . In the feeding must be stopped before shutdown , shutdown completed within the material crushing and then stop the motor .
( 3 ) , profession PF Impact Crusher in the repair or adjustment of the discharge port , it should first turn the rotor with human confirm the rotor and other parts without friction and jamming phenomena and can flexible rotation , before starting the motor .
( 4 ) , should always check the bearing seal is good , within the bearing grease should fill once a month , every three months should be fully cleaned oil and change the oil blankets .
( 5 ) , checking for loose fasteners , the two sides should focus on examination of the pressing plate hammer rotor plate screws to prevent loosening plate after plate hammer exposed ends of the rotor body , and the body carom , damage parts.
( 6 ) , in order to ensure that the operating personnel and equipment safety , operation of the machine is prohibited to repair , adjustment and cleaning work , prohibit open various small door .
( 7 ) , when the impact crusher product size is too large , you should stop to check the wear plate hammer , to prevent the rotor is worn . When the hammer to be adjusted 180 ° due to wear again , should make equal to the weight of each plate hammer and maintain a balance, to prevent back-breaking start after shock.