Lessons for IoT Startups of Pakistan
--
It’s my first post at medium and 5 Reasons Why My IoT Startup Failed by Yash Kotak inspired me to write it. Please read that one first as I am just going to tell my story of how I came close to doing an IoT startup and then steered clear of it, there may be a lesson or two for young entrepreneurs in it.
As the story goes, approximately one year ago (April 2015), my city Lahore hosted Pakistan’s first IoT expo. As I was tinkering with an RFID based attendance system for local schools at that time, I just wanted to be there at the expo, exhibiting what I made. I got talking to one of the organizers and then typical in Pakistani style, I got a last minute call. The expo was to be held in 2 days, the guy was leaving Islamabad, a city 4hrs drive away, and he asked me what I have to display at the expo? I told him it’s an attendance device, he said it will be too boring for the general audience. I offered another idea that for just pleasing the general audience, I can make a connected lamp that would work through WiFi. He was eccentric and said yes, immediately. He then gave me the timeframe to present him my new (just conceived) device for inspection, in 7 hours, when he would reach his hotel in Lahore from Islamabad.
In next 7 hours, I built a circuit with Arduino, found a locally available Bluetooth component, called HC-05, found an off-the-shelve relay module and assembled them all together in a power-strip style box with the help of a technician.
Within those same 7 hours, I also made an app to control the relay using UI buttons using Evothings Studio.
The organizer inspected my box next day, asked me if I could make it to work with WiFi instead of Bluetooth and if I can find a proper lamp to go with it, only then I can have the booth at the expo which was due to start in less than 48hrs. I promised it will be done. That day I found a WiFi Shield for Arduino in the local market, made the connections and got it to work, only to discover at the last moment that Arduino’s 5V output is not powering WiFi shield properly, so on the morning of IoT expo, I quietly made the connections of HC-05 again and put it on display, telling visitors all day that a lamp and a mini-fan were being controlled through WiFi (sometimes, the engineers just need to sweep the dust under the carpet!).
The expo started, people started coming in, I didn’t plan for what the booth’s interior would look like but luckily it seemed like pieces were falling together at just the right places, the response was awesome! I had the help of my colleagues from my another startup to man the booth while I was standing on the side with my little open circuit on the breadboard, trying to explain people about the circuit, the app and the working of Evothings Studio but the organizer was right, it was general public, they were more interested in the lights getting on/off using the mobile phone.
Soon my colleagues started asking me the price of those power strips as too many visitors were asking the same. Out of mid-air I picked a price of Rs. 6000 (approx. $60) and asked my colleagues to gauge the people’s response with this price. Most visitors were expecting the device to be around Rs. 10,000 ($100) mark. They also started enquiring from where can they get those devices, and they were also enquiring about our website (I registered the domain just a day earlier). From the booth, I called a friend, who made our WordPress website while we were asking the people to check it when they get a chance.
It went a little further; a friend of mine is a news anchor at Pakistan’s state TV channel. I got a message from him during the event, he wanted to interview me live on-air the same evening. While I had no idea what he knows and what he is going to ask me, I slipped from the booth at the set time, went at the back parking lot and received the call from the producer, who just said that your call is going live in 30 seconds! There was my friend, who was telling whole nation that a young guy from Lahore has built a device that can control the lights of your home through WiFi. He asked me questions and I given him answers without knowing a thing about what to say! I did told him, for face-saving, that yes the device is coming into the market very soon (the same device about which I had no idea a couple of days ago).
We came back from the event with happy faces (I was particularly happy, after a very long time I pulled off a stunt single-handedly, worked like crazy in those 3 days and went through many hoops to make that booth thing happen). My friends were calling me asking that I should give them rights to sell the power strip to the local market. I told them to wait! It was all a hype and these people may have seen a new thing but deep down I knew what I have done, how easy it was, and how a school kid should have been able to do this at home.
However, later on, I got carried away with the hype. I made a half-hearted business model canvas, and a confusing pitch, shown it to my mentor who politely sent me back saying you can earn a few bucks from this, local market may not have this stuff and there may be difficulties in importing from abroad but there is no exponential growth in it. So, I went back to find a better thing to do with my life.
The “lure” of own startup
Then, what did I notice? A lot of local startups started appearing in local incubators. The technician who helped me to put the whole thing in a box, started giving my number to the guys who wanted similar stuff. People, who didn’t knew me, started offering money so that if I could give them the circuit and the app, they would go and pitch at another incubator and make a startup out of it.
To those who got in touch with me, I explained the pitfalls, they were still reluctant in understanding as the lure of “doing their own startup” was greater than the problems I was explaining. Others, just went on, for a while I thought they will learn the lesson and pivot or maybe do another thing but they just went on, even attending the conferences abroad and winning local startup prizes showing the same electric box with electric things on top of it and a mobile app controlling the circuitry.
As due to our office location, I get to meet a lot of startups and looking at the founders from last 3, 4 years, some have done amazing startups. For others, I see a time period of 2–3 years, around which they try to pull off the same idea they initially came up with, without much traction or direction.
So, here are the lessons from the IoT world, the reasons for which I avoided doing such a startup, maybe others could learn something from them:
Doing hardware is 10x harder than software
Accept it! No matter how hard we try to portray, Pakistan doesn’t have a mature startup ecosystem. We face humongous difficulties while doing the software, the hardware is totally another story, here is how:
- Hardware needs manufacturing. Your arduino and WiFi shield are just prototyping tools, as Yash noted in his blog, doing prototype is the easiest part of the story. The components that actually will go into the final version may vary greatly, they need small form factor, they need reliability and they need a proper PCB, not the one you print with an iron at the hall road. There are some facilities within the country and they do print PCBs, problem is, they need order of a substantial size and at the end of it PCB still doesn’t look reliable.
- I particularly faced difficulties when I wanted a custom designed plastic box for the RFID attendance device. Someone quoted me $5000 for just the plastic dye if I ordered 10,000 pieces (each piece costing extra). Others offered to do in just $200 but when I shown them design, they said no, no, that’s not what we were talking about. And yes, 3D printed boxes are great for prototyping, not for the final version.
- China is far, China speaks another language, it’s difficult to deal with chinese. You will need to find someone in your own network who has experience in dealing with China, you will need to buy a ticket, get a visa, go there and live for a month just to figure out what the market is all about!
- You will need to come up with a distribution strategy. A distribution company sits next door to us. They often have to bribe customs, get NOCs from Pakistan Telecommunication Authority and Ministry of Defence, pay duties and freight just to receive already built, QC’ed, branded, labeled devices from China. Selling them is another story where they need to keep track of tax payable to local, provincial and federal governments and this is just one territory. Imagine, going to India and Bangladesh for the same, as you would obviously want to scale if you are doing a ‘startup’, no?
- You will need a support strategy, you have sold the device for $60, now it got toasted for whatever reason. Who will cover the support? Is there a warranty, is there a support system in a far flung town of north where you have shipped the device via a courier service?
The best advise if you really want to do this kind of startup as Yash noted in his blog, would be to just find similar devices from China, import them and ship them to your customers. Find, what the customers say and if there is any value you can add to what is already built, then make correct assumptions and go with them.
Your startup will need..
- USP (what are you offering which no other player is offering?)
- Real need (Is that really a problem for anyone? Start with yourself..)
- Defensibility (are there any patents that you may have and which can stop chinese manufacturers to develop cheap devices than yours?)
- Niche (Is that a niche you are working on? or you are going after full blown market where giants are already in the play?)
- Scalability (Do you really think just copying an idea from the west and cloning it for a new market could work in hardware space? Would you want to scale it to the other countries?)
- Expertise (What is your background? How your skills make the DNA of the company? Do you have expert skills to cater all those areas I mentioned above?)
- Funding (See, software is easy and cheap, hardware needs logistics. Investors know all of the above things, you will need to come up with MVP and long enough traction to raise any kind of investment, do you have your own dime for that?)
Some lessons from the startup industry
- It’s not the job of judges at the incubator launchpads to validate your idea, it is your job!
- Always seek caution when taking advice from anybody. First, see the background, is he a VC by profession? Is he an entrepreneur? Is he a technical guy? Is he a marketing guy? Is he a traditional businessman? No one is a super man, if somebody hasn’t done it himself, he doesn’t know the best solution. Peers are mostly very beneficial in this regard.
- A business is a business, it needs to spend some money to attract more money. A startup's job is to find that business model with which it attracts the money. If your startup is failing to do that, you need to pivot or find something else.
- True that you are learning from your mistakes but there are other countless people who are already a “learned lot”. Find and ask them!
- Modeling a startup to attract just investment and not the business, is not a startup!
- Getting featured in magazines and startup websites, doesn’t bring customers!
- Branding and marketing is the easier part, getting it done and making your customer happy is where you real metal will be tested!
Other kinds of hardware startups
It doesn’t matter if you are making the next-generation connected bag, a wearable or any other kind of hardware, above principles are same for everyone! Defensibility, logistics, market, everything. I know hardware startups look sexy because they are physical and non-technical people get attracted to them easily but does the customer really need it? Do you have tha capacity to build and ship it? Is there anyone else doing it already? These are the questions you need to ask yourself first!
If you want to do the IoT tinkering at home
I later wrote a few tutorials on how to use HC-05, Arduino and WiFi shield to make those circuits and accompanying apps. You may find them interesting and do-able at home with little effort
Remote Controlled LED using Mobile Phone and Internet
Remote Controlled LED using HC-05 Bluetooth, Arduino and Mobile Phone App
Nowadays, I am working on a startup idea to quantify the personality type, and emotions through the use of wearable devices. The end goal is to reduce the stress from daily life, making the user relax and happy. Sound like a crazy idea? It is! Here is a top tip: The amount of time and mind you will spend on a stupid idea is approximately equal to the amount of time and mind that you will put on a great idea! So, choose wisely!
That’s all for today, if you need to find me, you can always reach me at @hammadtariq or can find me wandering through the empty spaces of Arfa Software Technology Park, I am always up for a cup of coffee and meaningful discussion.
All the best!