Steps to Install Driving Hand Controls in Cars
There are ample of companies providing hand-driving controls in the market for different types of vehicles. Similarly, the reasons to use these aids also vary from person-to-person. Initially, designed for the handicapped, this tool is now popular among many others because of its ease of use. Therefore, before using these tools in the car, it is necessary to ensure their proper fitting.
And, in this regard, it is vital to know about the installation process of portable hand controls.
- Tools Required
Before initiating with the installation process of car hand controls, it is critical to know about the equipment needed. These are,
- Screw Driver
- Wrench
- Instruction Manual
- Hand Control Kit for installation
• Inspect the Requirement
Primarily, it is essential to understand the required hand controls in a car. As, collecting this information about the need of an individual actually helps in getting the clear assurance of the count of controls to be fitted in the car. Further, the dimensions of only those devices are then taken, which needs to be replaced or attached to the master hand controls.
• Removal of Existing Controls
In some of the cars or other vehicles, the old installed equipment need to be replaced safely and immediately for the installation of the new hand controls. For example, the indicator or the gear-stick of the vehicle has the small lump and handle on the end of the system, which needs replacement.
In such cases, it is wise to check the joints of the system with another car controls. And with this, one can easily decide whether to pull-it-off or attach some more tools for the fitting of the new portable hand controls in the vehicle.
• Planning and Scheming of Installation
Once checking on the already installed controls now, it’s the time to decide the actual position of the hand controls in the car. In simple words, the new portable hand controls should be installed at the position where they seem to be comfortable and beneficial for the driving person.
To add on, for this work, the assistance of any second individual is necessary. For instance, if the person has only impaired legs then, all the essential controls need to be fitted alongside or on the steering wheel of the car with one person holding the control and the other tightening its knob on the vehicle parts. Thus, if installed properly, these hand controls guarantee the effective performance and durability.
• Make use of Manual for Installation
To commence with the installation finally, it is important to refer the manual given along with it. Reading the instructions for fixing the handicapped driving aids from the manual helps in many other ways. Like, it helps in knowing about the other required tools, which are essential in the installation process.
To begin with the fitting process, it is initiated with the lowest control of the car, which mainly involves handbrake. This device is fitted using the wrench.
TIP: Insert the fastener, before tightening the bolts of the handbrake.
Next, ensure the proper fitting of this portable hand control and then, begin with the installation of other controls like lever and gearshift. Make sure, to test each control once fitted.
Concisely, after understanding the installation of the portable hand controls, now it is easy to check and ensure the proper fitting of the new controls in the car, which in turn would also be helpful for the safe driving of the disabled drivers.
