Learn the Basics of Xilinx Zynq® All Programmable System on a Chip (SoC) Design in Xilinx SDK.
All Levels, — Video: 2 hours Other: 0 mins, 18 lectures
Average rating 5.0/5 (5.0)
A Zynq Device (Microzed Board from Avnet Recommended but can use any Zynq Board)
Vivado Design Suite 2015.4 or higher
Xilinx SDK Installed (included with Vivado)
PC with Internet Connection
C/ C++ Programming Experience
Note! This course price will increase to $40 as of 1st October 2016 from $30. The
price will increase regularly due to updated content. Get this course
while it is still low.
LATEST: Course Updated For September 2016 OVER 1200+ SATISFIED STUDENTS HAVE ALREADY ENROLLED IN THIS COURSE!
Do you want to learn the new Zynq Development in Xilinx SDK? Are you lost when it comes to getting started with Zynq Training? Or are you new to FPGA’s? This course will teach you all the
fundamentals of the Zynq Design and Vivado in the shortest time so that you
can get started developing on (Field-programmable gate array) FPGA (System of Chip) SOC.
Now why should you take this course when Xilinx Official Partners already offer training? Most of their course are held bi-annually which means you will have to wait at most 6 months before starting the basic training. Also these courses can cost over thousands of dollars.
My Name is Ritesh Kanjee and I am an FPGA Designer with a Masters Degree in Electronic Engineering. I have over 7300 students on Udemy.This course is designed to help you understand the fundamentals of Zynq Design through practical and easy to understand labs. This class covers these capabilities, including BSP creation, built-indrivers, example C code, interrupts, debugging, flash programming. You will learn all the fundamentals through practice as you follow along with the training. Together we will build a strong foundation in SOC Development in Xilinx SDK with this training for beginners. This Course will enable you to:
Import Board Definition Files
Use the Vivado to build, synthesize, implement, and download a design to your FPGA.
How to use Xilinx SDK
Learn how to access memory modules and GPIO from Xilinx SDK
Debugging in Xilinx SDK
Understand Stucts or Structure in C programming and why they are important
After Completing this Training, you will know how to:
Design for 7 series+ FPGAs (System on Chip) SOC,
Learn how to set up the Zynq in Vivado,
Create a Simple Hello world App in Xilinx SDK,
Access GPIO to blink an LED,
Learn how to read from GPIO button peripherals,
Understand Structures in C or C++ and how to use them in Xilinx SDK,
Debug your design and understand how to step through lines in your code,
Learn how to add more hardware in Processing Logic,
Use the Processing logic to create a Block RAM memory,
Learn to Read and Write from internal memory,
Create your own timing App using both polled and interrupt methods
Get an indepth insight into interrupts and how they work on Zynq devices
This course only costs less than 1% of the Official XIlinx Partner Training Courses which has similar content. Not only will you save on money but you will save on Time. Similar courses usually run over 2 days. This course, however, you will be able to complete in under 2 hours, depending on your learning speed.
You will receive a verifiable certificate of completion upon finishing the course. We also offer a full Udemy 30 Day Money Back Guarantee if you are not happy with this course, so you can learn with no risk to you.
See you inside this course.
Use Vivado to Create a Zynq Hardware Design
Understand the Fundamentals of Zynq design in Xilinx SDK
Undetstand Structures for Processing Logic
Learn the difference between Processing Logic (PL) and Processing Systems (PS)
Go from Hello World to Blinking an LED to Reading and Writing from Memory to Exploiting Timers
Digital designers who have a working knowledge of HDL (VHDL) and who are new to Xilinx FPGAs
Designers who are already using Zynq for design should not take this course unless they are struggling with the basics.
Take this course if you want save $3200 in training costs of similar training material
Take this course if you want to get started with Zynq devices
Want to learn how to use Xilinx SDK
“Excellent Lectures and well structured. Thank you so much for this course. Really easy to follow and learn.” (Kyle Mcloed)
Ritesh Kanjee has over 7 years in Printed Circuit Board (PCB) design as well in image processing and embedded control. He completed his Masters Degree in Electronic engineering and published two papers on the IEEE Database with one called “Vision-based adaptive Cruise Control using Pattern Matching” and the other called “A Three-Step Vehicle Detection Framework for Range Estimation Using a Single Camera” (on Google Scholar). His work was implemented in LabVIEW. He works as an Embedded Electronic Engineer in defence research and has experience in FPGA design with programming in both VHDL and Verilog.
Instructor Other Courses:
Xilinx Vivado: Beginners Course to FPGA Development in VHDL
PCB Design a Tiny Arduino In Altium CircuitMaker
Learn Computer Vision and Image Processing in LabVIEW
Ritesh Kanjee coupons
Development course coupon
Udemy Development course coupon
Software Engineering course coupon
Udemy Software Engineering course coupon
Zynq Training — Learn Zynq 7000 SOC device on Microzed FPGA
Zynq Training — Learn Zynq 7000 SOC device on Microzed FPGA course coupon
Zynq Training — Learn Zynq 7000 SOC device on Microzed FPGA coupon
The post 67% off #Zynq Training — Learn Zynq 7000 SOC device on Microzed FPGA — $10 appeared first on Udemy Cupón.