Setup Netgear WiFi Extender Manually without ethernet

Setup Netgear WiFi Extender Manually without ethernet via mywifiext.net

If you own a Netgear WiFi Extender and just cannot wait to have a world-class WiFi experience you must start the setup right away. Make sure that you have the extender, router and installation device int he same room or at a closed vicinity to avoid any network interruptions. There are two ways to Setup Netgear WiFi Extender, read on.

The first way is to configure wireless extender with ethernet:

• Connect Netgear range extender to your computer with an ethernet cable.
• Open mywifiext.net in your browser.
• The login page will appear.
• Enter the username and password that is either given on the WiFi box or you used during the setup.
• If you happen to reset the username and password during setup time, log in using those credentials.
• If you have forgotten the password you can always recover it from the Username and Password Help link.
• Now click Log In
• Select Setup> Wireless Settings
• Under Security, Options verify the password. If it does not match change the router password.
• Click Apply
• Reconnect your devices to the Netgear WiFi Extender.

Next are the steps to setup WiFi extender without ethernet:

• Reset your Netgear WiFi Extender by holding the button of the factory reset for 7 seconds with the help of a very thin pin.
• Now connect to the extender’s default WiFi network on one of your devices.
• Open mywifiext.net in your browser.
• Enter the username and password of the extender.
• Now click Log In
• A prompt implying to reconnect your extender to your home network appears.
• Follow that and enter SSID and password next.
• You are all set to reconnect your WiFi devices to the extender.

Also can refer guide : Setup Netgear WiFi Extender Manually

You are all set to setup and re-setup your extender through the ethernet and also without the ethernet. If in case you are not able to access any of your routers or the extender try resetting the device. All you need to do is take a very thin pin and push it through the factory reset outlet for about 7 seconds. This will help you reset the connection and you can hence fill up the login information and reconnect all your devices.

You might face various problems while you initiate the setup. All you need is a solution to all device handling issues you face. Visit mywifiext.net to get a solution to any problem. If you are not able to access the website try opening it in another browser or remove all browsing history and cache before accessing the website.