Heat Resistant Vapor Braided Hose Hose
The adhesive of the heat-resistant steam braided hose has excellent temperature resistance. The pressure of the plastic hose is generally ten times lower than the working pressure. It is very useful when transporting saturated steam or boiling water above 150°C. The outer surface of the armored cable steam cloth hose is generally wrapped with a spiral of hot-dip galvanized metal material, which can effectively improve the compressive strength of the pipe body and improve the pressure bearing capacity. Complex or places with high safety requirements. Concentrator Industrial Production The iron ore in the mining plant is refined and left with mortar, industrial waste residue and slurry and discharged into the mine for secondary use in the middle and later stages. The particle size distribution of cement mortar after refining is generally fine, generally in the middle of 50 mesh to 200, which is very different from the size of sand. It contains water and belongs to the material of slurry particles. Therefore, the first factor to be considered in the selection of materials for rubber hose transportation is wear resistance. There are also many kinds of wear-resistant pipes used in mining, such as ceramic composite pipes and wear-resistant rubber-lined pipes.
Our company specializes in the production and manufacture of high wear-resistant rubber tubes with high quality. Welcome to consult. Letone Hydraulic Press Technology Co., Ltd. will continue to upgrade and consolidate its hard power based on improving the strength of the production and manufacturing team and introducing the most advanced production technology. We use the company’s own dominant position in the industry, continue to throw olive branches, attract a large number of high-level talents, establish a technical research and development department of new technology, keep pace with the times, improve the original professional technology, and develop new research and development ideas. International frontier.
On April 20, 2014, the Letone hydraulic press was certified by API from the American Petroleum Institute for the first time, which means that Letone’s crude oil pipelines announced their involvement in people from all over the world. On October 27, 2014, at the PTC exhibition in Shanghai, the crude oil pipeline of Letone was warmly welcomed by international exhibitors, and during the period, there were a steady stream of inquiries. In particular, they are full of praise for key data information such as strike reports and stability tests. my country’s Letone announced the first step to open the foreign market. The braided (or coiled) hose can be used by diesel engines to transport gasoline, gasoline, diesel engines and other mineral oils for vehicles.
The working temperature of the hose is not less than -30℃; at the same time, it is suitable for other petroleum-based, water-oil emulsion liquid and air compression and rare gas substances. In order to realize the research and development and improvement of core technologies, promote the research and development of unconventional oil and gas network resources in various countries in the world, and complete the production increase, sustainability and stable production of oil fields, Letone Technology is one of the earliest industrialized and large-diameter oil pipeline technology enterprises in China. Following the trend of shale gas technological revolution, it has continued to develop steadily. In view of this, Letone Technology focuses on improving the bottleneck problem of core technologies in various countries in the world, improving the high efficiency of R&D, and participating in and undertaking two scientific research projects in Henan, including the new project of H2S-resistant anti-single-pulse high-pressure oil drilling and production.