Lexmark printers are known for their durability & reliability. They are designed to handle high-volume printing without frequent breakdowns or malfunctions.
Check the points below to see the Lexmark Printer information in details are:-
Step 1: Visit the Lexmark Support Website
Go to the Lexmark Support Website: Open your web browser and navigate to [Lexmark Support](https://support.lexmark.com).
Search for Your Printer Model: In the search bar type lexmark 5490 and press Enter.
Step 2: Locate and Download the Driver
Select Your Printer Model: From the search results select the Lexmark 5490 printer.
Choose Your Operating System: Select windows 7 from the list of operating systems.
Download the Driver: Look for the driver that corresponds to your Windows 7 system (32-bit or 64-bit) and click on the download link to save the driver file to your computer.
Step 3: Install the Driver
Locate the Downloaded Driver File: Navigate to the folder where you saved the driver file.
Run the Driver Installation File: Double-click the downloaded file to start the installation process.
Follow the On-Screen Instructions: The installation wizard will guide you through the setup process. This typically includes: Accepting the license agreement. Choosing the installation type (Standard or Custom). Connecting the printer to the computer (usually via USB) when prompted.
Step 4: Connect the Printer
Unbox and Set Up the Printer: Ensure the printer is properly set up and ready to connect.
Connect via USB: Use a USB cable to connect the Lexmark 5490 printer to your computer. Ensure the printer is turned on.
Step 5: Complete the Installation
Finish the Installation Wizard: Follow the remaining prompts in the installation wizard to complete the setup.
Print a Test Page: After installation you may be prompted to print a test page to ensure everything is working correctly.
Step 6: Additional Steps (If Necessary)
Manual Installation: If the automatic setup doesn’t work you can manually add the printer.
Open Devices and Printers: Go to the Start menu and select devices and printers.
Add a Printer: Click on add a printer at the top of the window.
Select Local Printer: Choose add a local printer and follow the prompts.
Install the Driver: Select have disk and browse to the location where the driver was downloaded and extracted.
Complete Setup: Follow the remaining steps to finish the installation.
Step 7: Troubleshooting Tips
Ensure Compatibility: Make sure you have downloaded the correct driver for Windows 7 (32-bit or 64-bit).
Connection Issues: Verify that the USB cable is securely connected and the printer is powered on.
Firewall/Antivirus: Temporarily disable any firewall or antivirus software that might block the installation process.
Note:-
By following these steps you should be able to download and install the necessary drivers for your Lexmark 5490 printer on a Windows 7 computer. If you encounter any issues refer to the printer manual or contact Lexmark Support for further assistance.
