Tips To Install Sprinklers In Your Farm

Irrigation systems are one of the most important systems in place in the whole world right now. With the growing population and the diminishing of fresh water, it is imperative that a good system of sustainability is employed to use water judiciously.

This is what irrigations systems do exactly. Apart from pumping clean water from the ground, irrigation systems help to filter water, store them and use them wisely to water crops, livestock, lawns and more.

With the use of lawns being a prominent feature in most places, it is important to keep them looking lush and green all year without wasting water. Sprinklers are the most common of the irrigation supplies to get this job done!

If you are planning to install a sprinkler system at farms, here are some tips to help you out!

Look out for Potential Dangers

Before you hire a company to install sprinklers on your farm, go out and have a long walk around your property. You might encounter a piece of rough land you had no idea about or a rock formation that could be hard to go past. Keep the different types of obstacles you see so you have an idea of how much you can install and the optimal places for the same. It will also help you avoid any dangers that would have otherwise gone unnoticed.

Amount of Water

The amount of water that is used by sprinkler system is a lot more than you might be aware of. Since it works in gallons, you need to be sure about the amount of water you can, in fact, work off from and the capacity of your water tank or system. When you know your capacity, it can help you design the system you need and how to achieve the same.


Remember that the water line is not the only kind of utility line that is running through your ground. You will certainly be having electrical and internet connections amongst other things, so you need to get the parameters checked professionally before going ahead with the installation.


If your water tank or system does not have the capacity that you need, you have to get an alternate in place. Look out for the nearest and cheapest form of water source you require for powering the sprinklers before installing them. This will save you a lot of time and money later on.


Knowing the right locations will surely help you hook up your sprinkler installation perfectly. If you know your water source, you can set up the main motor as close to it as possible for maximum power. The same goes for the optimal location of the sprinklers to ensure even distribution of water to your crops.

Installing a sprinkler system is a lot of work. So, before you jump into the process and gather your irrigation supplies, get these basics in place and you’ll be ready to water your crops in no time!