HP also saved money on the Envy 7648 by using a monochrome control panel that is not touch sensitive. In terms of connectivity, you can connect the Envy 7648 to your system via either a wired or wireless connection.
Unboxing of a Printer
- Remove the tape covering the box’s flaps and gently push the flaps to the side to make it easier to remove the contents inside.
- Remove the cartridges and the power cord next. When you run out of ink, a card will be attached to the tri-color cartridge to make it easier to find the right cartridges.
- Remove the cardboard covering on top and, using the transparent cover with handles, pull the printer out of the box after placing it on a table or other hard surface to prevent the installation guides and CD from slipping away.
- Keep the multilingual setup and troubleshooting booklet, installation CD, and getting started guide separate. The installation CD includes both Mac and Windows software drivers. You can also get the drivers at hp.com/setup 7648. By tilting the printer slightly and dragging it out of the box, you can get it out of its transparent covering.
123 HP Envy 7648 Configuration
Before beginning the initialization process, turn on your printer. To turn on the printer and begin the initialization process, follow the steps below.
- Remove the twist tie from the power cord to free it. Connect one end to the printer’s rear and the other to a wall outlet. Avoid using power strips because they may cause power problems with the printer.
- Now, turn on the printer by pressing the power button on the printer’s left side. When you turn it on, it makes some noise. Wait for it to be quiet before starting the process.
- Similarly, select the region that contains your printer. The printer will then prompt you to install the ink cartridges. Continue reading to learn how to install the ink cartridges.
123 HP Envy 7648 Wireless Setup Wizard
To wirelessly configure your Envy 7648, follow the steps outlined below.
- Check that the printer and computer are both turned on and connected to the same wireless network.
- Keep the printer and computer close by to avoid connection problems.
- Remove any USB cables you have connected to the printer. If you connected the printer via USB, go to the HP website to learn how to switch from Wired to Wireless.
- The printer will now try to connect to the network.
Service 123 HP Envy 7648 ePrint
To configure the ePrint service on your Envy 7648, follow the steps outlined below.
- On the printer’s Control Panel, press the ePrint button.
- To enable Web services on your Envy 7648, read and accept the terms and conditions, and then follow all of the instructions on the screen.
- Following this, the printer will print the ePrint information page. The instructions for creating an ePrint account can be found on the ePrint information page.
- To send a print job to your printer, launch the e-mail application on your computer or mobile device and mail the documents to your printer.
123 HP Envy 7648 Wi-Fi Protected Setup
This Setup is only available if you have already downloaded and installed the software from 123 HP com setup 7648. Wi-Fi Protected Setup is an alternative method for connecting your printer to a wireless network. There are two methods for connecting, namely
We have a special relationship with HP Envy Printer Setup or its services, and we do trade products or services with them. This website’s images and content are solely for educational purposes.
