While prototyping a pedalboard, two events prompted me to reconsider the pedal board idea. (1) My Boss GT-8’s input exhibited some noise (probably a loose solder joint); and (2) I realized most of the equipment on my prototype pedal board wasn’t designed to be touched while playing (power supplies, direct box, etc.). Since the Boss GT-8 is over eight years old, I decided I would purchase a new effects system / amp modeler rather than fix the GT-8. Undoubtedly amp modeling has improved in the past eight years so that was a fairly easy choice, expense notwithstanding. Combining the two events, I chose to look at rack-mounted units rather than floor boards. I would move most of the equipment into a rack and minimize the equipment on the floor.
I selected the Line 6 Pod HD Pro. For a floor pedal, I got the Line 6 FBV Mark II Shortboard (it’s smaller than if I got a Pod HD 500). And for fun I acquired a Line 6 Relay 30 wireless transmitter to eliminate my cable dance.
The Pod HD Pro offers several outputs. An XLR feeds the sound board. Recently I’ve found the board monitor mix has been excellent, so I use that in-ear system. However, if I want more of my electric guitar, then a parallel ¼" feeds an ART PowerMix 3 mixer where I add the monitor mix. The combined guitar signal plus monitor mix feeds into a wireless personal monitor, the Galaxy Audio AS-1100.