Waste oil to diesel plant


Waste oil to diesel plant

Waste oil to diesel plant can successfully transfer the usedoil into high-quality diesel oil. The diesel from used oil can be directly used in low speed engines, such as digging machine, road roller, loading machine, etc. The price of the diesel oil is higher in the market.

Once oil has been used, it can be collected, recycled, and used over and over again. An estimated 380 million gallons of used oil are recycled each year. Recycled used oil can sometimes be used again for the same job or can take on a completely different task. For example, used motor oil can be re-refined and sold at the store as motor oil or processed for furnace fuel oil. Aluminum rolling oils also can be filtered on site and used over again.

Waste oil to diesel plant

Waste oil to diesel plant is a kind of machinery that recycling all kinds of waste oil ,such as waste tire oil ,waste plastic oil ,waste engine oil ,waste motor oil ,the waste oil to diesel plant refinery waste oil to diesel by distillation technology.

Waste oil to diesel plant working process

Waste oil to diesel plant working process

  1. Pump the waste plastic oil into reactor by oil pump.
    2. Use coal/wood/natural gas/fuel oil/electricity heating the reactor.
    3. After heating some time, the liquid oil will become oil gas, oil gas will be liquefied by the cooling pipe and condensers then will go into oil tank. Here we get mixed oil, or u can also call it fuel oil. If you wanna get a different quality diesel separately, through temperature control could separate it and collected into two different oil tanks.
    4. Some gases (syngas) like Methane, Ethane, Propane, Butane, and Hydrogen cannot be liquefied under normal pressure and normal temperature will be recycled to fire furnace heating the reactor.
    5. When use burning material heating the reactor, will produce some smoke. These smokes will go into our de-dusting system, the inside we design some high pressure nozzles, these nozzles will spraying some chemical water, the dust will be absorbed by the chemical water and flowing into the de-dusting pool. In the pool we will put some chemical which could remove the sulfur.

Diesel fuel application

6. The exhaust gas will go into the chimney sucked by draft fan, when emission the exhaust gas will become steam, no pollution.

Contact: Ms Bonnie
Phone: +86–371–5677 1821
Skype: bonniezhao2
Email: oilmachine@doinggroup.com

Chat online