Siemens LOGO8 part 1
How to set up?
1. Install LOGOSoft_V8.3_64bit
· Install LOGO7 è “LOGOV7_Setup.exe”
· Update to LOGOSoft_V8.3_64bit è “LOGOV8.3_Upgrade.exe”
2. Open LOGO!Soft Comfort V8.3
3. Click Network Project > Add New Device > LOGO! > LOGO! 8.3
4. Set IP address and pick Interface
5. Draw diagram
Q1. LOGO8_t01_InputOutput
6. Click PC -> LOGO! (Ctrl+D) to upload
7. Result
Q2. LOGO8_t02a_pressOnpressOff_Ladder
Open LOGO!Soft Comfort V8.3 click New > Ladder diagram
Then follow steps 3 to 7. from Q1
Result
Q3. LOGO8_t02b_pressOnpressOff
follow steps 1 to 7. from Q1
Result
Q4. LOGO8_t03_pressOn_HoldOff
follow steps 1 to 7. from Q1
Result
Q5. LOGO8_t04_Using_Cursor
follow steps 1 to 7. from Q1
Result
press ESC + ⬅️ or ⬆️ or ⬇️ or➡️
Q6. LOGO8_t05a_Count_Show
follow steps 1 to 7. from Q1
Result
press ESC + ⬆️ is count up
press ESC + ⬇️ is count down
Q7. LOGO8_t05b_Count_SpeedUp
follow steps 1 to 7. from Q1