5 Major Steps to Follow When Installing a Paint Protection Film

Made from a type of plastic, Paint Protection Film is a self-healing film applied to be painted surface of a new or used car to protect the paint from bug splatters, stone chips, and minor abrasions. The plastic in it has a certain amount of elasticity, which allows it to be curved, stretched and bend around corners and bends and makes it suitable for the body panels of a car. If you want to keep your car brand new forever, then it will be the ultimate choice for you.

There are several companies that offer Paint Protection Film Adelaide and the surrounding areas. You can pick a reputable and trustworthy one to buy PPF for your car. But before that take a look at the various stages that are followed when installing it in a car.

Step 1: Clean and prepare the surface properly

The first and foremost step that one has to follow when preparing a vehicle for installing Paint Protection Film is to clean the surface in a proper manner. Most of the installers use a good degreasing agent in order to remove debris and dirt. Following this, the surface should really be compounded, as well as polished to remove any imperfections before installing the Paint Protection Film.

Step2: Cut the PPF material into sections

Once a car is prepped, the installer will cut the PPF material for installation purposes. It is similar in design to window tint. Most of the time, they will install in sections. Such as rocker panels, hood, side mirrors, quarter panel, door, or other sections that are less than 5 feet square. After cutting the film, they will line it up, as well as prepare for the installation.

Step3: Use an activator solution

To install a Paint Protection Film, one needs an activator that is familiar as a fitting solution. It allows the PPF to activate a ‘glue-like’ substance that ensures that it sticks to the surface of the paintwork. Based on the brand of the film, the fitting solution can range from simple water to a soapy-like substance.

Step 4: Fitting the PPF

It is a daunting task, so, it is always advisable to rely on an experienced professional for this. PPF does not just fit perfectly when it is applied. Actually, it is a lot more complicated to install than vinyl. The process of installing a PPF on a vehicle involves a series of spraying — squeegee, as well as moving the PPF. When it is in the correct position, the installer will use the squeegee to remove bubbles or creases in the film.

Stop 5: Drying stage

Once the PPF has been applied, and then all bubbles and creases are removed, the ending stage is drying or heat-activating the film. They use an individual heat gun that activates the adhesive, as well as causes the PPF to stick to the body. Moreover, it shrinks the material and creates a tight fit to the surface of the bodywork.

These are the general stages that are followed by the installers while installing a PPF in a car. If you also want to install a PPF on your car, then opt for a professional who does so along with offering indoor and outdoor signage, and vehicle signage design Adelaide and add a protective layer on your car.

Author bio: George Smith is a regular blogger on business signs and vehicle signage design Adelaide. IN this write-up, he has mentioned the steps that are followed when installing Paint Protection Film Adelaide.