TEVO Black Widow 3D Printer Kit Build and First Impressions Review

TEVO Black Widow 3D printer kit
TEVO Black Widow 3D printer kit

The TEVO Black Widow is a $500 Chinese Aliexpress 370x250mm 3D printer kit. How good could it possibly be?

When I shared with the 3D printing community that I was going to purchase one of these kits, I have to say the response was … mixed …

More than one person warned me to step away from the buy button.

But then there was the 11/11 Aliexpress discount. So, yeah, I bought it, despite some of my friends strong protestations. What do they know, right? ;)

Maker Hacks - Arduino_Raspberry Pi_3D Printing_Maker Chat

What you get in the box

Fear turned to excitement when the box arrived after a couple of weeks wait.

Did I tell you it was free shipping via DHL?

There is talk of North American distribution, so I expect the shipping to get even swifter.

Unlike the Australian 3D printer, this was packaged very well. Nice laser cut foam, individual slots for everything, parts boxed and bagged, printed manual, set of tools.

It’s a RepRap cartesian style printer with Marlin firmware. I bought the version with the BLTouch bed levelling sensor (more on that in a bit), but either way you get a 370 x 250mm heated bed with a kind of Buildtak style surface. LCD screen, E3D V6 clone, MKS 1.4 board. Aluminium extrusion, of course, but also laser cut/CNC fixtures too. Red, anodized, beautiful, metal parts.

Points scored.

This might be an “Aliexpress” printer kit but they obviously are working hard to be up there with Mr Prusa.

The build experience

All nicely boxed

All nicely boxed

Aluminium extrusion

Aluminium extrusion

Bed plate

Bed plate

X and Y

X and Y

TEVO Black Widow Kit 3D Printer

Bed and steppers

So ... much ... peeling

So … much … peeling

Backing paper peeled

Backing paper peeled

Control and power

Control and power

The build was a fun experience. Probably ambitious if this is your first 3D printer, especially if it is your first 3D printer kit, but certainly doable if you take your time and ask for help with anything confusing.

Was it up to the Prusa i3 Mk2 high standard? No, nor should you expect it to be, but I think they could get there, and the community is great at filling in the gaps. With Telli Mantelli, Chris Leonardo from TEVO, the videos, and the TEVO Black Widow Owners Facebook Group helping me, I got it working over a weekend, and had fun doing it.

There are a lot of tiny screws and nuts, so take my advice and print off a few of these bad boys. You don’t want these pieces rolling into a dark corner under your desk. Your sanity and eyesight depends on it.

Word of warning, the printed documentation has a parts list before each step, but in places the parts listed differs from the actual steps. Follow the steps and Dean Walsh/The Art of 3D Printing’s excellent videos instead.

Ignore the parts lists
Ignore the parts lists

Also, as is often the case with these kits, some of the parts you need will be in past or future bags. And the instructions are not always clear or complete. And the steps in the video aren’t always perfect.

Not to say those things are showstoppers, there are tons of happy Black Widow owners out there who not only got their own printers working, but will help you too. I (and I believe some others) have suggested TEVO take a leaf out of Printrbot and Prusa’s books and put the documentation online, so it is always up to date, and the community can comment with tips, questions and advice.

Disaster strikes

OK so some minor niggles aside, it all went well, right?

Not exactly. First start up my MKS board burned out.

I’d just got through celebrating on Instagram when I smelled the special odour of the magic electronic smoke.

The good news is the company was very responsive and are sending out a new board. Even better, I happened to have a spare on hand that I purchased as an option when my Australian printer RAMPS electronics did the same thing.

MKS LCD display blank/not working

I loaded up the Marlin firmware, and … the LCD screen was blank and just making a ticking noise. Turns out the new MKS board had the cables oriented backwards to the original. Easy fix, once you know.

Then I did a test cube print and found the coordinates were doubling, the printer was trying to print off the back of the bed.

Turns out the firmware/board was expecting the purple stepper drivers instead of the green ones my new board came with. Rather than mess about with configuration I just switched over the drivers. Another easy fix (when you know the answers).

Success! A working printer!

I am going to do some upgrades and mods later, but to begin I will get a feel for it as supplied. I am optimistic this is going to turn out well with some tweaking.

Not cool

No print cooling fan or nozzle? Really?

There is a fan for the extruder itself, but I would suggest a fan and nozzle should be included to cool prints otherwise overhangs etc will be a bugger to print.

Bypass the BLTouch

This is going to be an unpopular opinion, but I think you should save your money and get the non-BLT version. Levelling the bed is not that difficult, and the machine with the BLT option does not come with the mount for it anyway. I now have two unused BLTs sitting here. Perhaps I should do a giveaway.

Initial Impressions

Yes, it took four days from unboxing to having a working print, but those were not full days, probably under 12 hours in total. Not bad at all.

Yes, it helped that I had a spare MKS board on hand, and I have already ordered a new power supply because the failure rate of those guys isn’t the best.

2016-12-13 16.29.56

That all said, the first print off was not terrible, in fact to say I had done zero calibration, belt tightening, slicer tweaking, etc, it was impressive. The price is amazing for such a build area.

Update January 18th 2017

After using the printer I realized I still had under-extrusion, despite doing all the usual calibration and slicer tuning.

Turning to the ever-helpful Facebook Group, I was advised to check the Newbie Guide section on under-extrusion, and low and behold there is a “fix”.

Unfortunately the fix involves either adding spacers or filing down a section of motor body. Looking at my extruder, the spacers was not going to be a good option because I had good filament alignment so I went with filing down.

The extrusion does appear better now but I am not happy that this was necessary, as you can imagine.

I’m also reaching out to TEVO as they have released a new external mosfet and a new heated bed to prevent the problem I had with my MKS board burning (see above). Hopefully this will be replaced on warranty, will keep you posted.


I’d say if you are on a budget, you need a large build area, and are willing to put in some effort and problem solving, then this printer is definitely worth checking out. Just know it is currently not going to be perfect right out of the box.

(Note: You know the drill. As I always say in my reviews, if you do buy something after clicking any of my links I might get a small sales commission, rest assured that commission does not influence my opinion or writing, and it never raises the price you pay at check out :) )

Originally published at Maker Hacks.

Show your support

Clapping shows how much you appreciated Maker Hacks’s story.